Refrigeration Mechanic Terms and Conditions SA: Service Agreements and Call-Out Terms
Book a free 30-minute callCall (08) 7094 2021
Same-day response. Prefer to text? WhatsApp us
Refrigeration mechanic terms and conditions in South Australia
A refrigeration call-out at two in the morning is a sale made under pressure. The customer wants the cool room running before the stock spoils, and nobody reads terms at that hour. The terms that matter are the ones already in place: the service agreement, the call-out rates, the approval limit for repairs and the limit on liability for spoiled stock. Talon Legal drafts refrigeration mechanic terms and conditions, service agreements and installation contracts for South Australian refrigeration businesses. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Refrigeration mechanic terms and conditions SA key facts
| Issue | Position for refrigeration mechanics in South Australia |
|---|---|
| Governing law | Ozone Protection and Synthetic Greenhouse Gas Management Regulations 1995 (Cth); Australian Consumer Law; Building Work Contractors Act 1995 (SA) for installation work in buildings; Building and Construction Industry Security of Payment Act 2009 (SA). Current to 22 November 2026. |
| Refrigerant handling | Work on refrigeration and air conditioning equipment, including installing, commissioning, servicing and maintaining it, needs a refrigerant handling licence (regulation 111). |
| Bulk refrigerant | Acquiring, possessing or disposing of bulk refrigerant needs a refrigerant trading authorisation or another listed permission (regulation 112(2)). |
| Penalties | Strict liability offences of 50 penalty units and civil penalties of 60 penalty units (regulations 111, 112). |
| Business customers | A customer is a consumer where the price is no more than $100,000 or the goods or services are of a household kind (section 3). For goods or services not of a household kind, liability can be limited to repair, replacement, resupply or their cost, unless the customer shows reliance on the limit is not fair or reasonable (section 64A). |
| Unfair terms | A standard form contract with a consumer or small business must not contain unfair terms (section 23). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need refrigeration mechanic terms and conditions? What this guide covers
This guide covers what is particular to refrigeration mechanic terms and conditions in South Australia, current to 22 November 2026: refrigerant licences and trading authorisations, service agreements and call-out terms, stock loss and the limits of liability, installing commercial refrigeration, repairs for households, and working on another business’s premises. Building a cool room is covered in the cool room builder guide.
We act for commercial refrigeration mechanics, service businesses that maintain supermarket, hospitality and cold storage equipment, and installers of refrigeration plant.
Free Consultation. Send us your service agreement, call-out rates and the job sheet your technicians use. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Refrigerant licences and trading authorisations
- Service agreements and call-out terms
- Stock loss and the limits of liability
- Installing commercial refrigeration
- Repairs for households
- Working on another business's premises
- What the refrigeration pack holds
- How similar matters tend to play out
- Refrigeration case law
- How we build refrigeration mechanic terms and conditions
- Frequently asked questions
- Related trade contract guides
Refrigerant licences and trading authorisations
The Commonwealth regulations control who may work on refrigeration equipment and who may hold refrigerant. A person must not carry out work in relation to refrigeration and air conditioning equipment without a refrigerant handling licence for it, unless a listed exception applies (regulation 111(1)). The work covered includes installing, commissioning, servicing and maintaining the equipment, whether or not refrigerant is present (regulation 111(2)).
| Licence or authorisation | What it allows |
|---|---|
| Full refrigeration and air conditioning licence | Handling a refrigerant for any work in the refrigeration and air conditioning industry, other than the automotive industry (Table 131, item 1) |
| Restricted domestic refrigeration and air conditioning appliances licence | Any work on domestic refrigeration or air conditioning equipment, and any work on commercial stand-alone refrigeration equipment (Table 131, item 4) |
| Restricted refrigeration and air conditioning licence | Specified work, for a person who can do it competently but does not meet the conditions for a full licence (regulation 133) |
| Refrigerant trading authorisation | Acquiring, storing or disposing of refrigerant other than halon (regulation 140(1)(a)) |
Licences belong to people; the trading authorisation sits with the business that buys and holds bulk refrigerant (regulation 112(2)). A service agreement should state the licences the business relies on, and the job sheet should record which licensed technician did the work. Each breach of regulation 111 or 112 is a strict liability offence of 50 penalty units and a civil penalty of 60 penalty units.
Service agreements and call-out terms
A service agreement turns a series of emergencies into a contract settled in advance. The call-out terms are what the customer reads when the invoice arrives.
| Term | What it settles |
|---|---|
| Equipment list | The cool rooms, cabinets, ice machines and plant the agreement covers, with their age and condition at the start |
| Scheduled maintenance | Visits a year, the tasks done at each visit and the report given |
| Response times | Hours to attend for urgent and routine faults, and what counts as urgent |
| After-hours rates | The rates for nights, weekends and public holidays, and the minimum charge |
| Approval limit | The amount the technician can spend on a repair without further approval, and how approval is given at night |
| Parts | Whether parts are charged at list price, cost plus a margin or included, and who carries the delay when a part is back-ordered |
| Equipment past its life | A right to recommend replacement and to stop repairing equipment that cannot be made reliable |
| Payment | Invoice terms for business customers, interest on overdue amounts and suspension of non-urgent work |
A written quote before major repairs protects both sides. The terms should say that the business may carry out a temporary repair to save stock before a quote is given, and charge for it.
Before you sign the next supermarket or hospitality service agreement. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Stock loss and the limits of liability
A failed cool room can destroy more stock in a night than the service agreement earns in a year. The contract has to decide what the business pays for.
- Who is a consumer. A buyer is a consumer where the price is no more than $100,000, or the goods or services are of a kind ordinarily acquired for personal, domestic or household use (Australian Consumer Law section 3). Commercial refrigeration service for a business can fall outside that, depending on the price and the kind of service.
- Limiting liability. Where the services are not of a household kind, a supplier can limit its liability for a breach of a guarantee to supplying the services again or paying for that (section 64A(2)). The limit does not apply where the customer shows that reliance on it is not fair or reasonable (section 64A(3)). For a consumer otherwise, a term that purports to exclude, restrict or modify the guarantees is void (section 64).
- Unfair terms. A blanket exclusion of all loss in a standard form contract with a small business is exposed to the unfair contract terms provisions, and an unfair term is void (section 23).
- Stock insurance. The agreement should say that the customer insures its stock and that the business is not its insurer.
Pedra Branca shows how a court treats losses that flow from equipment that does not work. A dairy business sued over a herd management system its supplier could not make work ([4], [146]). The court did not allow the claim for lost milk production, but allowed labour costs for the period until an alternative system was running ([184], [185]). A refrigeration contract that states which losses are excluded, and which costs are paid, decides the same argument before it starts.
Installing commercial refrigeration
Installing refrigeration plant is a different contract from servicing it.
- Performance. The specification should state the design temperatures, the pull-down time and the ambient conditions the plant is designed for. A customer who makes a purpose known and relies on the installer’s skill gets the benefit of a fitness for purpose guarantee (section 61). In Pedra Branca, the court found an implied condition of fitness for the purpose the supplier was told about ([102], [103]).
- Cool rooms. Constructing a cool room is building work and needs a builders licence; the cool room builder guide deals with it.
- Payment claims. Refrigeration installed as part of constructing or fitting out a building can be construction work under the Security of Payment Act (section 5(1)). A payment claim must identify the work, state the amount and say it is made under the Act (section 13(2)).
- Commissioning. A commissioning record signed by the customer marks the point at which the plant was handed over working.
Repairs for households
A household fridge, freezer or split system repair is a consumer contract.
- Due care and skill. The repair must be rendered with due care and skill (section 60), within a reasonable time where no time is agreed (section 62).
- Purpose. Where the customer makes a purpose known and relies on the technician, the repair must be reasonably fit for it (section 61).
- Repair warranties. A warranty against defects given on a repair must be in a document that meets the Competition and Consumer Regulations, regulation 90 (section 102).
- Uneconomic repairs. The terms should allow the technician to stop after diagnosis, charge the call-out and diagnosis, and recommend replacement where the repair would cost more than the appliance is worth.
Working on another business’s premises
Refrigeration work is done in other people’s kitchens, warehouses and vessels. Who sets up the work area, who isolates the equipment and who does the work around it should be in writing.
Heithersay shows what happens when it is not. A refrigeration business agreed with a shipyard to build the refrigeration for a fishing vessel, and there was no written contract ([8]). The court had to find from the evidence that the shipyard’s painter was to paint the chillers ([9]) and that the shipyard set them up in its shed ([12]). A one-page scope sheet records both points before the work starts.
| Site term | What it settles |
|---|---|
| Scope | The equipment to be built, installed or repaired, and the work the customer's own staff or other trades will do |
| The work area | Who sets up and clears the area, and its condition before the technician starts |
| Isolation | Who isolates power and gas to the equipment before work begins |
| Hot work | Permits, fire watch and the customer's rules for brazing and welding |
| Site rules | Inductions, access hours and the customer's safety requirements |
What the refrigeration pack holds
A refrigeration pack is built from our masters and a refrigeration schedule, and quoted as a fixed fee before we start.
- A service agreement with an equipment list, response times, after-hours rates and an approval limit.
- Call-out terms and a job sheet that records the technician’s licence, the fault, the work and the parts.
- Liability terms for business customers that use the section 64A limit where it is available.
- Installation terms with design conditions, commissioning and payment claim forms.
- Household repair terms with a repair warranty document that meets regulation 90.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
The weekend compressor. A restaurant’s cool room compressor fails on a Saturday night. The service agreement sets the after-hours rate and an approval limit, and the technician fits a temporary repair, saves the stock, and quotes the replacement on Monday.
The spoiled stock claim. A cold storage customer claims the value of a lost load after a fault. The service agreement excludes stock loss, states that the customer insures its stock, and limits liability for a business service to resupply or its cost.
The back-ordered part. A display cabinet needs a part that will take three weeks. The terms say the business is not responsible for the supplier’s delay, and the technician offers a hired cabinet in the meantime at a stated charge.
Refrigeration case law
None of the decisions below concerned a refrigeration service agreement. Each turned on what had been agreed, and what losses a court would allow, when equipment work went wrong.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| Heithersay v Adelaide Ship Construction International Pty Ltd [2011] SADC 32 | District Court | With no written contract, the court had to find who was to set up and paint refrigeration chillers; the claim against the occupier failed | [8], [9], [12], [75] to [77] |
| Pedra Branca Dairying Pty Ltd v B and S Walker Pty Ltd [2012] SADC 35 | District Court | A purpose made known gave an implied condition of fitness; lost production was not allowed but labour was | [102], [103], [146], [184], [185] |
Case notes
Heithersay v Adelaide Ship Construction International Pty Ltd [2011] SADC 32
A refrigeration company agreed with a shipyard to construct the refrigeration for a fishing vessel. The job was two chillers, a condenser and two compressor sets. Judge Muecke recorded that there was no written contract ([8]). He found it was agreed that the shipyard’s painter would paint the chillers ([9]), and that the shipyard set them up in its shed for painting and for the refrigeration company to prepare them ([12]). The refrigeration owner’s son was seriously injured in an explosion while working on a chiller ([10]). The shipyard was not shown to have breached its duty as occupier ([75]); the Court found the plaintiff’s own conduct was the sole cause ([76]), and the claim failed ([77]).
Pedra Branca Dairying Pty Ltd v B and S Walker Pty Ltd [2012] SADC 35
A dairy business contracted to have two dairies refurbished and a herd management system supplied ([4], [5]). It sued for breach of an implied condition of fitness for purpose, and for misrepresentation and misleading conduct ([1]). Judge Cuthbertson found the dairy had made the purpose known and relied on the supplier’s skill ([102]). The contract therefore carried an implied condition under section 14 of the Sale of Goods Act that the goods be reasonably fit for that purpose ([103]). The supplier had shown it could not make the system work ([146]). No allowance was made for lost milk production ([184]), but labour was allowed for the period until an alternative system was operating ([185]).
How we build refrigeration mechanic terms and conditions
We start with your customers and your work: service, repair or installation, supermarkets or households, regular contracts or emergency call-outs.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on licences, authorisations, customers and response commitments | We check the licences and the trading authorisation against the work and the business structure |
| 2. Review | Your service agreements, call-out terms, job sheets and recent disputes | We mark the gaps on approval limits, stock loss and payment |
| 3. Drafting | Masters and the refrigeration schedule | We draft the service agreement, call-out terms, installation terms and household repair terms |
| 4. Delivery | Word documents ready for your next customer | We brief your service manager on approval limits and the liability terms |
We cannot promise that terms prevent every claim for spoiled stock. A service agreement that says who insures the stock, and what the business pays when equipment fails, settles the claim on the terms both sides signed.
When a customer claims for spoiled stock. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Is a refrigeration service agreement template enough in SA?
Not on its own. A generic template will not record the licences and trading authorisation the business relies on, the approval limit for night repairs, or a stock loss limit that works with the consumer guarantee rules for business customers.
Does a refrigeration mechanic need a refrigerant handling licence?
Yes. Work in relation to refrigeration and air conditioning equipment, including installing, commissioning, servicing and maintaining it, needs a refrigerant handling licence entitling the person to do it (regulation 111).
Does a refrigeration business need a refrigerant trading authorisation?
A person must not acquire, possess or dispose of bulk refrigerant unless it holds a refrigerant trading authorisation or another listed permission (regulation 112(2)). A business that buys refrigerant for its technicians needs one.
What does a restricted domestic licence cover?
Any work on domestic refrigeration or air conditioning equipment, and any work on commercial stand-alone refrigeration equipment (Table 131, item 4). Other commercial systems need a full licence or a licence covering the specified work.
Can a refrigeration mechanic exclude liability for spoiled stock?
Sometimes. Where the services are not of a household kind, liability for a breach of a guarantee can be limited to supplying the services again or paying the cost of that (section 64A). The limit fails if the customer shows reliance on it is not fair or reasonable. Otherwise, a term excluding the guarantees is void (section 64).
Are call-out fees and after-hours rates enforceable?
Where they are stated in the terms before the work is done, they are part of the price the customer agreed to. A term that sets the upfront price is outside the unfair contract terms test (Australian Consumer Law section 26(1)(b)), so the rates should be disclosed before the call-out, not added afterwards.
Is installing a cool room building work?
Yes. Constructing a cool room is building work and needs a builders licence; the cool room builder guide sets out the rules.
Can a refrigeration installer use the Security of Payment Act?
Where the refrigeration is installed as part of constructing or fitting out a building, the work can be construction work (section 5(1)), and the business can serve a payment claim that meets section 13(2).
What should a household repair warranty say?
A warranty against defects must be in a document that meets regulation 90 of the Competition and Consumer Regulations (Australian Consumer Law section 102), including the prescribed text and how to claim.
Do I need a lawyer for refrigeration mechanic terms and conditions?
The law does not require one, but refrigerant licensing, call-out terms and stock loss limits all sit in the same service agreement. We draft refrigeration mechanic terms and conditions for South Australian refrigeration businesses that want the night call-out settled before it happens.
Related trade contract guides
Related guides
- Plumbing and electrical contracts SA
- Air conditioning installer terms and conditions SA
- Mechanical services contractor terms and conditions SA
- Cool room builder terms and conditions SA
- Appliance installer terms and conditions SA
- Building maintenance contractor terms and conditions SA
- Terms of trade and retention of title
- Trade contracts SA
- Subcontractor agreements