Hot Water Installer Terms and Conditions SA: Contracts for Hot Water System Installation
Hot water installer terms and conditions in South Australia
A hot water replacement is a small job with a lot attached to it. There is a unit with its own manufacturer’s warranty, connections that need certificates, an old unit to take away, and a household waiting for a shower. Talon Legal drafts hot water installer terms and conditions, supply and installation terms and warranty call-out terms for South Australian hot water installers and plumbing businesses. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Hot water installer terms and conditions SA key facts
| Issue | Position for hot water installers in South Australia |
|---|---|
| Governing law | Plumbers, Gas Fitters and Electricians Act 1995 (SA); Water Industry Act 2012 (SA); Gas Act 1997 (SA); Electricity Act 1996 (SA); Australian Consumer Law. Current to 21 November 2026. |
| Licences | On a reading of section 3 of the PGE Act, a change-over is plumbing, plus gas fitting for a gas unit or electrical work for an electric connection, each needing the contractor licence and registered workers (sections 6(1), 13). |
| Standards | Plumbing work, and its examinations and tests, must be carried out as the Technical Regulator's published standards require (Water Industry Act section 67(2)). |
| Gas units | The licensed contractor engaged is responsible for the work and its tests meeting the regulations, and the certificate requirements apply (Gas Act section 56). |
| Electric units | The contractor that engaged the registered electrical worker is responsible for the work, tests, notification and certificates of compliance meeting the regulations (Electricity Act section 61(1), (2)(a)). |
| The unit | Goods supplied to a consumer must be of acceptable quality and reasonably fit for any disclosed purpose (Australian Consumer Law sections 54, 55). |
| Door-to-door and phone sales | The consumer can terminate an unsolicited consumer agreement within ten business days, and nothing may be supplied or paid in that time (sections 82, 86). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need hot water installer terms and conditions? What this guide covers
This guide covers what is particular to hot water installer terms and conditions in South Australia, current to 21 November 2026: the licences behind a change-over, sizing and supplying the unit, installation, certificates and the old unit, selling hot water systems door to door or by phone, warranty call-outs, and getting paid. The law all plumbing, gas and electrical trades share is in the plumbing and electrical contracts SA guide.
We act for hot water specialists, plumbing businesses and retailers that sell hot water systems installed.
Free Consultation. Send us your quote form, your warranty call-out terms or your sales script. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Licences for a hot water change-over
- Sizing and supplying the unit
- Installation, certificates and the old unit
- Selling hot water systems door to door or by phone
- Warranty call-outs and getting paid
- What the hot water pack holds
- How similar matters tend to play out
- Hot water case law
- How we build hot water installer terms and conditions
- Frequently asked questions
- Related trade contract guides
Licences for a hot water change-over
| Unit | Work involved | Authority needed |
|---|---|---|
| Electric storage | Water connections; electrical connection | Plumbing; electrical, unless an electrician is engaged for it |
| Gas storage or continuous flow | Water connections; gas connection and flue | Plumbing and gas fitting |
| Heat pump or solar | Water connections; electrical connection; roof or ground mounting | Plumbing and electrical; building work for structural mounting beyond the licences |
A plumbing or gas fitting contractor needs no builders licence for building work its own licence authorises (Building Work Contractors Regulations regulation 5(1), (2)). Each worker needs registration for the work done personally (PGE Act section 13), and the contractor commits an offence if regulated work in its business is done by someone not registered for it (section 12).
A business that sells hot water systems installed is performing the installation. “Perform” includes causing, organising or arranging the work (section 3). On a reading of section 3, that applies to retailers and to offers that bundle installation with a unit. An unlicensed contractor is not entitled to any fee or other consideration for its work unless a court is satisfied the failure resulted from inadvertence only (section 6(2)).
Sizing and supplying the unit
Choosing the unit is where the consumer guarantees start.
- Disclosed purpose. Where the consumer tells the installer the household size, the hours of use or the roof space, the unit must be reasonably fit for that disclosed purpose (Australian Consumer Law section 55).
- Acceptable quality. Goods supplied to a consumer must be of acceptable quality (section 54), and the installer is the supplier where it supplied the unit.
- The installation. Services must be rendered with due care and skill (section 60), and the services and any resulting product must be reasonably fit for a purpose made known (section 61(1)).
- Client-supplied units. Where the client buys the unit, the terms should say the installer installs it as supplied and is responsible for the installation, not the unit.
- The manufacturer’s warranty. The terms should say who registers it, that its benefits sit beside the guarantees, and that the installer does not give the manufacturer’s warranty itself.
A term that purports to exclude, restrict or modify the guarantees is void to that extent (section 64(1)). For a commercial building, where the unit is not of a kind ordinarily acquired for household use, liability can be limited to repair or replacement, or to supplying the services again (section 64A).
Installation, certificates and the old unit
| Step | What the terms deal with |
|---|---|
| Standards | The work meets the standards the Technical Regulator publishes, including any temperature control they require (Water Industry Act section 67(2)) |
| Gas certificate | Where a registered gas fitting worker does the work, the regulations' requirements on notification and certificates of compliance must be complied with (Gas Act section 56(2)) |
| Electrical certificate | The contractor is responsible for the notification and certificate requirements for the electrical work (Electricity Act section 61(2)(a)); an owner may rely on the certificate (section 60(2)) |
| Rectification | For gas work, the Technical Regulator can direct rectification by the person who did the work within the previous two years (Gas Act section 57) |
| The old unit | Who disconnects, removes and disposes of it, the charge for doing so, and whether any trade-in value belongs to the client |
| Access and isolation | Access to the meter box, gas meter and water isolation valve, and what happens if they are faulty or inaccessible |
A person may rely on a certificate of compliance issued under a scheme established or approved by the Technical Regulator (Water Industry Act section 69(2)), which is one reason the certificate should be given to the client at handover.
Selling hot water systems door to door or by phone
Heat pump and solar hot water offers can be sold by door knocking or telephone, and those sales bring in the unsolicited consumer agreement rules.
- What is caught. An agreement made after negotiations in person away from the supplier’s premises, or by telephone, which the consumer did not invite, where the price is more than $100 or cannot be worked out (Australian Consumer Law section 69(1)). An invitation merely to quote a price is not an invitation to negotiate (section 69(2)).
- Termination. The consumer can terminate by oral or written notice within ten business days, a period that extends to three or six months for listed contraventions (section 82).
- No supply or payment. During those ten business days the supplier must not supply the goods or services, or accept or require any payment (section 86(1)).
- Emergency jobs. On a reading of section 69(1), a customer who calls an installer for an emergency replacement has invited the negotiations, so that agreement is not unsolicited.
Sales paperwork written for solicited jobs is where this goes wrong. In Green Engineering, below, a door-to-door seller’s contract pads gave five days to cancel instead of ten.
Warranty call-outs and getting paid
- Payment on completion. A domestic change-over under $20,000 is minor domestic building work (Building Work Contractors Regulations regulation 4(1)(h), (4)), and Division 1 of Part 5 does not apply to it (section 27(2)), so the quote terms set the payment rules.
- Warranty call-outs. Say when attendance is free, such as an installation fault. Say when it is charged, such as a manufacturer’s fault attended as agent or no fault found, and how the manufacturer is billed.
- Rental properties. Say who the client is (the landlord, through the agent) and the response time offered. The installer’s time runs from approval and access. In Larosa, below, a landlord was ordered to pay a tenant compensation that included an amount for 16 days without hot water, so agents have reason to press for speed.
- Builder and commercial work. Payment claims under the Security of Payment Act must identify the work, state the amount and state that they are made under the Act (section 13(2)).
What the hot water pack holds
A hot water pack is built from our masters and a hot water schedule, and quoted as a fixed fee before we start.
- Supply and installation terms with sizing, warranty registration and old unit clauses.
- Install-only terms for client-supplied units.
- Unsolicited sales paperwork with the ten business day notice and a no-payment period.
- Warranty call-out terms that separate installation faults from manufacturer faults.
- Landlord and agent terms with response times and approvals.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
The family of six and the small tank. A family runs out of hot water every morning after a change-over. The quote recorded the household size the client gave and the unit recommended for it, which is where the section 55 argument starts and ends.
The heat pump sold at the door. A salesperson signs up a homeowner on the doorstep and books installation for two days later. The agreement is unsolicited, and nothing can be supplied or paid within ten business days (section 86(1)). The business moves installation to day eleven and fixes its forms.
The rental with no hot water. An agent calls on a Friday afternoon. The terms set the weekend rate, required approval and access, and recorded when each was given, which matters when the landlord later asks why the tenant waited.
Hot water case law
None of the decisions below concerned a hot water installer’s contract. Each decides a rule a hot water business runs into.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| Green Engineering (Vic) Pty Ltd v Deputy Commissioner for Consumer Affairs [2016] SASC 162 | Supreme Court | A seller of installed systems pleaded guilty to unlicensed contracting and to unsolicited consumer agreement offences, including pads that gave five days to cancel instead of ten | [4], [5], [12], [13], [14], [43] |
| Larosa v Savage [2007] SADC 105 | District Court | A landlord was ordered to pay a tenant compensation that included an amount for 16 days without hot water in winter; the appeal was dismissed | [5], [32] |
Case notes
Green Engineering (Vic) Pty Ltd v Deputy Commissioner for Consumer Affairs [2016] SASC 162
A Victorian company sold and installed solar systems in South Australia without a South Australian contractor licence, arranging licensed electricians to do the electrical work ([4], [5]). Doyle J explained why contracting to supply and install was organising or arranging regulated work ([12]). Its sales representatives used contract pads that gave a five day cooling-off period, not the ten days that applied ([13]). One offence involved taking a $500 deposit and not completing the installation for almost three years ([14]). On appeal the overall fine was replaced with fines totalling $44,800 ([43]). The definition of perform was then in section 4 and is now in section 3, in materially the same words on organising or arranging.
Larosa v Savage [2007] SADC 105
On appeal from the Residential Tenancies Tribunal, the order in issue required a landlord to pay a tenant $1,300, including $340 compensation for distress and inconvenience for being left without hot water in the middle of winter for 16 days ([5]). The appeal was dismissed and the Tribunal’s orders affirmed ([32]).
How we build hot water installer terms and conditions
We start with the units you install, how you sell them and who calls you when they fail.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on your licences, your unit brands, your sales channels and your rental work | We sort your jobs into emergency change-overs, planned upgrades and unsolicited sales |
| 2. Review | Your quotes, sales forms, warranty call-out terms and handover documents | We mark cancellation periods, warranty promises and sizing records that need fixing |
| 3. Drafting | Masters and the hot water schedule | We draft your supply and install terms, sales paperwork and call-out terms |
| 4. Delivery | Word documents and a handover checklist | We brief your installers and sales staff on sizing records, certificates and cancellation periods |
We cannot promise that terms prevent every dispute. Terms that match how hot water is sold, sized and installed decide most of them before they start.
Before your next hot water quote goes out. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Do you need a licence to replace a hot water system in SA?
On a reading of section 3 of the PGE Act, yes. A change-over is plumbing, plus gas fitting for a gas unit or electrical work for an electric connection, so the business needs the matching contractor licence and the workers need registration (sections 6(1), 13).
Can an electrician replace an electric hot water system?
On a reading of section 3, the electrical connection is electrical work and the water connections are plumbing, which needs plumbing authority as well.
Who is responsible if the new unit is too small?
Where the consumer disclosed the household’s needs, the unit must be reasonably fit for that purpose (Australian Consumer Law section 55). A quote that records what the client said, and the unit recommended for it, is the best evidence.
Do I have to register the manufacturer's warranty?
The law does not say who registers it. The terms should, and should say the manufacturer’s warranty sits beside the consumer guarantees.
Is there a cooling-off period for hot water systems?
For an unsolicited consumer agreement made at the door or by phone, the consumer can terminate within ten business days, and nothing may be supplied or paid in that time (sections 82, 86(1)). An emergency call-out the customer asked for is not unsolicited, on a reading of section 69(1).
Can I charge for a warranty call-out?
Yes, where the terms say so and the fault is not one the business is responsible for, such as a manufacturer’s fault attended as agent or no fault found. The terms cannot exclude the consumer guarantees (section 64(1)).
Who provides the gas certificate for a gas hot water system?
Where a registered gas fitting worker does the work, the regulations’ notification and certificate requirements must be complied with (Gas Act section 56(2)).
Who takes away the old hot water unit?
The terms decide it: who disconnects, removes and disposes of it, the charge, and any trade-in value.
Does a hot water job need a written contract?
A domestic change-over under $20,000 is minor domestic building work, so Division 1 of Part 5 does not apply (section 27(2)). At $20,000 or more, a section 28 contract with Form 1 is needed.
Do I need a lawyer for hot water installer terms and conditions?
The law does not require one, but a hot water job joins a unit warranty, certificates and sometimes an unsolicited sale. We draft hot water installer terms and conditions for South Australian installers that keep each part straight.
Related trade contract guides
Related guides
- Plumbing and electrical contracts SA
- Plumber terms and conditions SA
- Gas fitter terms and conditions SA
- Electrician terms and conditions SA
- Solar installer terms and conditions SA
- Drain relining contractor terms and conditions SA
- Appliance installer terms and conditions SA
- Pump installer terms and conditions SA
- Minor domestic building work SA
- Statutory warranties and defects SA
- Trade contracts SA
- Terms of trade and retention of title