Solar Installer Terms and Conditions SA: Solar Installation Contracts
Solar installer terms and conditions in South Australia
Selling and installing solar in South Australia brings in more law than almost any other trade job of the same size. Installing solar panels in relation to a building is prescribed building work, the electrical work needs a licensed contractor and a registered electrician, and a system sold at the door or over the phone comes under the Australian Consumer Law’s unsolicited sale rules, which give the buyer ten business days to change their mind. Talon Legal drafts solar installation contracts, quotes and terms for South Australian solar and battery businesses. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Solar installer terms and conditions SA key facts
| Issue | Position for solar installers in South Australia |
|---|---|
| Governing law | Building Work Contractors Act 1995 (SA) and Regulations 2026; Plumbers, Gas Fitters and Electricians Act 1995 (SA) (the PGE Act); Electricity Act 1996 (SA); Australian Consumer Law. Current to 20 November 2026. |
| Building work | Installing solar panels in relation to a building is prescribed building work, and in relation to a house it is domestic building work (regulation 4(1)(g), 4(2)). |
| Licences | Consumer and Business Services (CBS) guidance: without structural building work, an electrical contractor's licence or a building work contractor's licence; with structural building work, a building work contractor's licence and a registered building work supervisor. |
| Builders licence exemption | A PGE electrical contractor is exempt only for building work its PGE licence authorises (regulation 5(1)). |
| Selling without installing | A business that contracts to supply and install a system performs the electrical work, because "perform" includes organising or arranging it (PGE Act section 3), so it needs the contractor licence itself. |
| The $20,000 line | CBS: a contract valued at $20,000 or more, including small-scale technology certificates (STCs), needs a written domestic building work contract with Form 1 (section 28). |
| Deposits | Not more than 5% on a contract of $20,000 or more (section 30(4)(d)(ii)). On an unsolicited sale, no payment at all in the first ten business days (Australian Consumer Law section 86). |
| Door-to-door and phone sales | Unsolicited consumer agreements: ten business days to terminate, and no supply in that period (sections 69, 82, 86). |
| Certificate of compliance | CBS: the customer must receive the electrical certificate of compliance within 30 days of connection. The contractor's duty to meet certificate requirements is in section 61 of the Electricity Act. |
| Warranties | Statutory warranties on domestic building work for five years after completion (section 32); consumer guarantees (sections 60 to 64); written warranties must meet regulation 90 of the Competition and Consumer Regulations 2010. |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need solar installer terms and conditions? What this guide covers
This guide covers what is particular to solar installer terms and conditions in South Australia, current to 20 November 2026, for solar retailers, installers and battery businesses. It sets out the licence position, the contract each kind of solar sale needs, the clauses solar terms should carry, and getting paid. Where it reports the guidance of Consumer and Business Services, it says so; that guidance is the regulator’s view, not the legislation itself. The rules shared by every PGE trade are in the plumbing and electrical contracts SA guide.
We act for solar businesses selling to homeowners, landlords and commercial clients, and for installers working for retailers.
Free Consultation. Send us your quote template, sales script and installation terms. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Which licences does a solar business need?
- Which contract fits which solar sale?
- Door-to-door and telephone sales
- The clauses that matter in solar installer terms and conditions
- Getting paid for solar installations
- What the solar pack holds
- How similar matters tend to play out
- Solar contract case law
- How we build solar installer terms and conditions
- Frequently asked questions
- Related trade contract guides
Which licences does a solar business need?
Two Acts apply. The electrical work is regulated by the PGE Act, and installing solar panels in relation to a building is building work under the Building Work Contractors Act because the 2026 Regulations prescribe it (regulation 4(1)(g)).
CBS published its view in its guide for solar panel installers (November 2025):
| Work | Licence CBS says is needed |
|---|---|
| Selling systems that include installation | A licence: "If you sell solar panel systems that include installation you must be licensed." |
| Installation with no structural building work | An electrical contractor's licence, or a building work contractor's licence (for example one endorsed for PV solar panel installation) |
| Installation with structural building work, such as modifying or reinforcing roof framing | A building work contractor's licence, with supervision by a registered building work supervisor |
| The electrical work itself | Always a registered electrician |
The legislation is consistent with that guidance. An electrical contractor licensed under the PGE Act is exempt from the building work contractors licence only on condition that the building work it performs is limited to work its PGE licence authorises (regulation 5(1)). Structural work to a roof is building work outside an electrical licence, and a building work contractor must have an approved registered supervisor (section 12).
Selling is enough to need a licence. “Perform” includes causing, organising or arranging the work (section 3 of the PGE Act), so a retailer that contracts to supply and install, and books licensed electricians to do the work, is carrying on business as an electrical contractor. The Supreme Court decision in Green Engineering, below, arose from exactly that model. A retailer without the licence also risks the contract price: an unlicensed contractor is not entitled to any fee or other consideration for its work unless a court finds the failure resulted from inadvertence only (section 6(2)).
Which contract fits which solar sale?
| Solar sale | Rules that govern it | Document |
|---|---|---|
| Rooftop system for a homeowner valued under $20,000 including STCs | Minor domestic building work for contracts made on or after 10 November 2025; statutory warranties apply | Solar installation agreement with the specification, STC and connection terms |
| Rooftop system or system and battery valued at $20,000 or more including STCs | CBS: a written domestic building work contract with Form 1. Section 28 formalities, 5% deposit cap, progress payments for work done, cooling-off | Domestic building work contract with a solar schedule |
| Any of the above sold at the door or by phone without an invitation | Unsolicited consumer agreement rules on top of the building contract rules | Agreement documents prepared for that kind of sale on instruction, after a review of the sales process |
| Tilt frames or structures needing council approval, at $20,000 or more | Building indemnity insurance before work starts (sections 33, 34); CBS gives the 100 mm and 100 kg test for when approval is not needed | Domestic building work contract and insurance certificate |
| Installer working for a solar retailer | A subcontract (section 3); the Security of Payment Act applies | Installation subcontract with payment claim terms |
| System on a business's roof | Not domestic building work; the Security of Payment Act applies to construction work, including installing power systems (section 5(1)) | Commercial supply and installation contract |
The Act draws the $20,000 line on the “cost to the building owner” (section 3). CBS counts the value of STCs in it. Where assigned STCs bring the owner’s payment below $20,000 but the contract value including them is $20,000 or more, the safer course is the full domestic building work contract with Form 1, as CBS guides.
Door-to-door and telephone sales
Section 69(1) of the Australian Consumer Law defines an unsolicited consumer agreement. The dealer and the consumer negotiate face to face somewhere other than the supplier’s business premises, or by telephone. The consumer did not invite the dealer to negotiate. The price is more than $100 or another prescribed amount, or cannot be worked out when the agreement is made. An invitation merely to quote a price is not an invitation to negotiate (section 69(2)).
Two rules follow for an unsolicited solar sale.
- The consumer can terminate within ten business days after the agreement is made, or after receiving the agreement document if it was negotiated by phone. Some breaches by the supplier extend that period (section 82).
- The supplier must not supply the system, or accept or ask for any payment, during those ten business days (section 86).
Those rules sit on top of the Building Work Contractors Act. A door-to-door sale of a $24,000 system still needs a section 28 contract with Form 1, and the owner has the five clear business day cooling-off right under section 36 as well as the ten business days under the Australian Consumer Law. Contract pads written for solicited sales are the trap: in Green Engineering the sales representatives’ pads gave a five day cooling-off period instead of the ten days the law required ([13]).
The clauses that matter in solar installer terms and conditions
CBS lists what a solar quote should state. It includes the full price and any other costs, and whether the price includes STCs and whether they are to be assigned. It also includes the system specifications and layout, connection requirements, maintenance, dates, and work the client must do first. Good terms go further on the points where solar jobs go wrong.
| Clause | Why it matters for solar installers |
|---|---|
| System specification and substitution | Panel, inverter and battery models are the subject of the sale. A clause letting the installer change them without the customer's agreement is the kind of term the Australian Consumer Law lists as possibly unfair (section 25(g)); limit substitution to equivalent or better components with notice. |
| STCs and price | State whether the price includes STCs, who claims them, and what happens if the STC value or the claim changes before installation. |
| Connection approval | The installation depends on connection to the network. The terms should say what happens, and what is refunded, if approval is refused or limited. |
| Roof and structure | The roof must take the system. Existing roof damage, tilt frames and work over 100 mm off the roof or 100 kg at a contact point change the licence, approval and insurance position under the CBS guidance. |
| Switchboard and existing wiring | An older switchboard may need work before connection. Price it as a separate item or a variation, agreed in writing. |
| Output and savings | Where the owner makes known the result wanted and relies on the installer's skill, the consumer guarantee in section 61 and the statutory warranty in section 32(2)(f) can attach to that result. Sales material and the contract should say the same thing. |
| Deposits and timing | On a contract of $20,000 or more, a deposit of not more than 5%. On an unsolicited sale, no payment for ten business days. Taking a deposit and not installing within a reasonable time was one of the offences in Green Engineering ([14]). |
| Certificate of compliance | Name the certificate as part of the work. CBS says it must be given within 30 days of connection. |
| Product and workmanship warranties | Manufacturer warranties are given by the manufacturer on its own terms. The installer's own workmanship warranty, if given in writing to a consumer, must comply with regulation 90 (section 102). Neither reduces the statutory warranties or the consumer guarantees. |
| Licence details | On a contract of $20,000 or more, the licensed business name and licence number must appear in the contract (section 28(1)(c)). |
| Cancellation | Two cooling-off rights can run at once on a large unsolicited sale. Cancellation charges after those periods should recover actual costs, not penalise (section 25(c)). |
Getting paid for solar installations
- Homeowners, $20,000 or more. A deposit of not more than 5%, then genuine progress payments for work already performed, requested by written notice (section 30). Final payment on completion is a progress payment for completed work.
- Unsolicited sales. No payment, and no supply, until the ten business days have passed (section 86).
- Installers for retailers. The installation subcontract is a construction contract: payment claims made under the Security of Payment Act, payment schedules within the contract time or 15 business days, and no pay when paid (sections 12 to 14).
- Commercial systems. Commercial terms with progress claims, and the Security of Payment Act’s rights alongside them.
The deposits and progress payments guide sets out section 30 in full.
What the solar pack holds
A solar pack is built from our masters and a solar trade schedule, and quoted as a fixed fee before we start.
- A solar installation agreement for systems under $20,000 including STCs, and a domestic building work contract with Form 1 for larger systems and battery packages.
- For door-to-door and telephone sales, a review of your sales process, and agreement documents prepared for those sales on instruction, because the unsolicited consumer agreement rules add their own requirements.
- A subcontract for installers working for retailers, and commercial supply and installation terms.
- Quote, variation and written advice forms.
- A solar trade schedule: system specification tables, STC and connection terms, roof and structure exclusions, product and workmanship warranty wording.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
A $22,000 system where $4,500 of STCs are assigned to the installer. The owner pays $17,500. CBS counts the STCs, so on its guidance the contract is valued at $22,000 and needs to be a written domestic building work contract with Form 1, signed by both parties, with a deposit of not more than 5%. Using the full contract removes the argument about which figure the Act measures.
A door-to-door sale with installation booked for the following week. The agreement is unsolicited, so the owner has ten business days to terminate, and the installer cannot install or take any payment until they have passed. An installation booked inside that period has to be moved.
A solar retailer that subcontracts every installation. The retailer signs the homeowner contracts and arranges licensed electricians to do the work. It is performing electrical work for the purposes of the PGE Act and needs an electrical contractor licence, and the installers’ subcontracts are construction contracts under the Security of Payment Act.
Solar contract case law
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| Green Engineering (Vic) Pty Ltd v Deputy Commissioner for Consumer Affairs [2016] SASC 162 | Supreme Court | A company that contracts to supply and install solar systems carries on business as an electrical contractor, even where a licensed electrician does the electrical work | [12] |
Case notes
Green Engineering (Vic) Pty Ltd v Deputy Commissioner for Consumer Affairs [2016] SASC 162
A Victorian solar company sold systems in South Australia through internal sales staff and door-to-door contractors, and arranged licensed electricians to install them. It held a Victorian registration but no South Australian contractor licence ([4], [5]). It pleaded guilty to carrying on business as an electrical contractor without a licence, to unsolicited consumer agreement offences, and to accepting a $500 deposit for an installation it did not complete for almost three years ([6], [13], [14]). Doyle J explained that the company breached section 6 of the PGE Act by entering into contracts to supply and install, which organised or arranged the performance of regulated work, although a licensed electrician did the electrical work ([12]). The appeal was allowed: the $105,000 fine was set aside and replaced with fines totalling $44,800, of which $17,500 was for the licence offence ([36], [43]).
How we build solar installer terms and conditions
We start with how you sell: showroom, website, phone or door to door, and whether you install yourself or subcontract. The sales channel decides which rules apply before the price does.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on your licences, sales channels, system sizes, STC handling and installers | We map each sale type against the $20,000 line, the unsolicited sale rules and the licence guidance |
| 2. Review | Your quotes, sales scripts, contract pads and warranty documents | We mark what fails section 28, sections 69 to 86, regulation 90 or the unfair terms rules |
| 3. Drafting | Masters and the solar trade schedule, and documents for unsolicited sales if you sell that way | We draft for your products and your channels |
| 4. Delivery | Documents for your CRM, e-signing and sales team | We brief your sales team on cooling-off, deposits and installation dates |
We cannot promise that terms prevent every complaint. Terms that match the way you actually sell are the place to start.
Before your next sales campaign. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Do solar installers need a builders licence in SA?
It depends on the work. CBS guidance is that installation without structural building work can be done under an electrical contractor’s licence or a building work contractor’s licence, while structural building work needs a building work contractor’s licence and a registered supervisor. The PGE exemption covers only building work the electrical licence authorises (regulation 5(1)).
Does a solar company need a licence if licensed electricians do the installation?
Yes. “Perform” in the PGE Act includes organising or arranging the work (section 3). In Green Engineering the Supreme Court explained that a company contracting to supply and install solar systems was carrying on business as an electrical contractor, even though a licensed electrician did the electrical work ([12]).
When does a solar installation contract need Form 1?
When the job is domestic building work of $20,000 or more. CBS guidance is that a contract valued at $20,000 or more, including STCs, needs a written domestic building work contract, whether the contractor is a builder or an electrician. The contract must be given to the owner with Form 1 (section 28).
Do solar panels need council approval in SA?
CBS guidance is that panels fitted to the pitch of the roof, no more than 100 mm off the roof and no more than 100 kg at any point of contact, can be installed by a registered electrician without council approval. Systems outside those limits may need approval, and at $20,000 or more approval brings in building indemnity insurance (sections 33, 34).
What is the cooling-off period for solar sold door to door?
Ten business days after the agreement is made, under the unsolicited consumer agreement rules (Australian Consumer Law section 82), and longer for some breaches by the supplier. The supplier cannot install or take any payment in that time (section 86). On a contract of $20,000 or more the five clear business day right in section 36 of the Building Work Contractors Act applies as well.
How much deposit can a solar installer take?
On a domestic building work contract of $20,000 or more, not more than 5% of the price (section 30(4)(d)(ii)). On an unsolicited sale, no payment of any kind during the ten business day termination period (section 86).
When must the certificate of compliance be given for a solar system?
CBS guidance is that the customer must receive the electrical certificate of compliance within 30 days of the system being connected. The contractor’s obligation to meet the certificate requirements comes from section 61 of the Electricity Act 1996.
Should a solar quote say whether STCs are included?
Yes. CBS lists, among the matters a quote should state, whether the price includes small-scale technology certificates and whether they are to be assigned. The answer also affects which side of $20,000 the contract falls on in CBS’s view.
Who is responsible if the panels or inverter fail?
The manufacturer’s warranty covers the product on its terms. The installer gives the statutory warranty that materials it supplies are good and proper (section 32(2)(b)) and the consumer guarantees for its services (sections 60 to 62), none of which can be excluded. A written workmanship warranty must comply with regulation 90.
Is a home battery installation domestic building work?
Connecting a battery system into a home’s electrical installation is electrical work, which is prescribed building work and, on a house, domestic building work (regulation 4(1)(h), 4(2)(g)). A battery added to a solar contract counts towards the contract’s value for the $20,000 line.
Do I need a lawyer for solar installer terms and conditions?
The law does not require one. The building contract rules, licensing and the unsolicited sale rules all apply to solar, and a template written for one of them misses the others. We draft solar installer terms and conditions for South Australian businesses that fit the way you sell and install.
Related trade contract guides
Related guides
- Plumbing and electrical contracts SA
- Electrician terms and conditions SA
- Plumber terms and conditions SA
- Trade contracts SA
- Domestic building work contracts
- Minor domestic building work under $20,000
- Building deposits and progress payments
- Variations to a building contract
- Statutory warranties and defects
- Builders licence SA
- Subcontractor agreements