Pump Installer Terms and Conditions SA: Contracts for Pumps and Pump Stations
Pump installer terms and conditions in South Australia
A pump is bought for a number: so many litres a minute at a given height, day after day. When the number is not met, the argument is about what was promised, what the site was really like and who chose the pump. Talon Legal drafts pump installer terms and conditions, pump station contracts and service terms for South Australian pump installers, pump suppliers and plumbing and electrical businesses. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Pump installer terms and conditions SA key facts
| Issue | Position for pump installers in South Australia |
|---|---|
| Governing law | Plumbers, Gas Fitters and Electricians Act 1995 (SA); Plumbers, Gas Fitters and Electricians Regulations 2025 (SA); Building and Construction Industry Security of Payment Act 2009 (SA); Australian Consumer Law. Current to 21 November 2026. |
| Water pumps | Water plumbing covers equipment connected directly or indirectly to a public water supply system (PGE Act section 3). On a reading of that definition, a booster or pressure pump on a house supply is plumbing work. |
| Sewage and stormwater | Draining work covers sanitary and stormwater drains (section 3); stormwater pipes of up to 90 mm, and work under a professional civil engineer's supervision, are exempt (PGE Regulations regulation 4(5)(a)(v)). |
| Electrical connection | A plug-in pump beyond an outlet socket is exempt; wiring a pump in is electrical work (regulation 4(5)(c)(iii)). Primary production installations outside a municipality or township are exempt (regulation 4(5)(c)(ii)(A)). |
| Performance | Goods supplied to a consumer must be reasonably fit for a disclosed purpose (Australian Consumer Law section 55); misleading conduct is prohibited and loss caused by it is recoverable (sections 18, 236). |
| Pump stations | Drainage, water supply and sanitation installations are construction work for payment claims (Security of Payment Act section 5(1)(b), (c)). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need pump installer terms and conditions? What this guide covers
This guide covers what is particular to pump installer terms and conditions in South Australia, current to 21 November 2026: licences for pump work, the duty point and the specification, performance claims, commissioning and handover, pump stations on commercial projects, service and breakdowns, and getting paid. The law all plumbing, gas and electrical trades share is in the plumbing and electrical contracts SA guide.
We act for pump suppliers and installers, bore and farm water businesses, and plumbing and electrical contractors that build pump stations.
Free Consultation. Send us your quote form, your pump selection sheet or your service agreement. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Licences for pump work
- The duty point and the specification
- Performance claims and what sales staff say
- Commissioning and handover
- Pump stations on commercial and civil projects
- Service, breakdowns and call-outs
- What the pump pack holds
- How similar matters tend to play out
- Pump case law
- How we build pump installer terms and conditions
- Frequently asked questions
- Related trade contract guides
Licences for pump work
| Pump | What the work is | Authority needed |
|---|---|---|
| Booster or pressure pump on a mains-connected supply | Water plumbing equipment (PGE Act section 3), on a reading of the definition | Plumbing contractor licence; registered worker |
| Tank pump feeding pipes that also connect to the mains | Water plumbing at the connection (section 3) | Plumbing contractor licence; registered worker |
| Sewage pump station or pump-out unit | Part of sanitary drainage (section 3); part of an on-site wastewater system where it serves one (Wastewater Regulations regulation 5) | Plumbing licence, and a wastewater works approval for new systems or changes in capacity or type |
| Stormwater pump station | Draining work, unless within the 90 mm or civil engineer exemption (PGE Regulations regulation 4(5)(a)(v)) | Plumbing licence, or the exemption's conditions |
| Bore or dam pump with no link to the public supply | Outside water plumbing on a reading of section 3 | None for the plumbing; electrical rules still apply |
| Power to the pump | Electrical work if wired in; exempt if plugged in (regulation 4(5)(c)(iii)) | Electrical licence for fixed wiring, except primary production installations outside a municipality or township |
On a reading of section 3, a pump supplier that sells “supplied and installed” performs the installation, because “perform” includes causing, organising or arranging the work. A business that takes the job needs the contractor licence for the regulated parts (section 6(1)), even where its subcontractor holds one.
The duty point and the specification
The duty point is the flow and head the pump must deliver. Putting it in writing gives every later question a fixed point.
| Specification term | What it records |
|---|---|
| Duty point | Required flow at the required head, with the allowance for pipe losses |
| Site data | Suction lift or water depth, pipe sizes and lengths, fittings and heights, measured or provided by the client |
| Fluid | Clean water, bore water, effluent or stormwater with solids |
| Power | Supply available, phase and capacity, and who upgrades it |
| Duty cycle | Hours of running, starts per hour and backup arrangements |
| Who selected the pump | The installer from client data, the client, or the client's engineer |
Goods must be reasonably fit for a purpose the consumer disclosed, unless the consumer did not rely, or it was unreasonable to rely, on the supplier’s skill or judgment (Australian Consumer Law section 55(3)). Services carry the same limit (section 61(3)). A specification that records who selected the pump, and from what data, is what settles that question.
Performance claims and what sales staff say
A person must not, in trade or commerce, engage in conduct that is misleading or deceptive or likely to mislead or deceive (Australian Consumer Law section 18(1)). A person who suffers loss because of it can recover the loss from the person who engaged in the conduct, or anyone involved in it (section 236(1)).
- Brochure figures. Manufacturer curves and claims passed on to a client become the seller’s statements unless the terms and the conversation say otherwise.
- Running costs and labour. Statements about energy use, maintenance or how much supervision a system needs are representations a buyer can act on.
- Automation. Claims that a system runs itself need to match what the controller does on site.
In Splash Touch Free Car Wash, below, a car wash system sold as totally automatic needed manual labour, and the distributor and manufacturer were both ordered to pay damages.
Commissioning and handover
| Step | What the terms deal with |
|---|---|
| Commissioning test | Flow and pressure readings at the duty point, recorded and signed |
| Settings | Pressure switch, float, controller and protection settings handed over |
| Electrical certificate | The contractor that engaged the registered electrical worker is responsible for notification and certificates of compliance (Electricity Act 1996 section 61(1), (2)(a)) |
| Plumbing standards | Plumbing work and its tests must meet the Technical Regulator's published standards (Water Industry Act section 67(2)) |
| Manuals and warranty | Manuals handed over, and who registers the manufacturer's warranty |
| Client's operation | What the client must do: priming, maintenance intervals, keeping intakes clear |
Pump stations on commercial and civil projects
- Security of Payment Act. Construction work includes works forming part of land, such as water mains, sewers and drainage installations, and fittings such as water supply, drainage and sanitation systems (section 5(1)(b), (c)). Payment claims must meet section 13(2).
- Adjudication. A determination made on a point the parties were not given a chance to address can be void. In Built Environs, below, a determination was set aside for that reason.
- Not household goods. For goods or services not ordinarily acquired for household use, liability under the guarantees can be limited to repair, replacement or supplying the services again (Australian Consumer Law section 64A), unless the buyer shows that reliance on the limit is not fair or reasonable (section 64A(3)).
- Design responsibility. Whether the installer designs the station, or builds to the client engineer’s design, decides who answers for the duty point.
Service, breakdowns and call-outs
- Call-out charges. Free for installation faults; charged for blockages, misuse, power faults and no fault found.
- Manufacturer faults. The installer attends as the manufacturer’s agent, or the client deals with the manufacturer directly; the terms say which.
- Consumer guarantees. Services must be rendered with due care and skill (section 60), and the guarantees cannot be excluded (section 64(1)).
- Spare pumps and downtime. Whether a loan pump is offered, at what charge, and what the installer is not liable for while a pump is away for repair.
What the pump pack holds
A pump pack is built from our masters and a pump schedule, and quoted as a fixed fee before we start.
- Supply and installation terms built around a duty point specification and commissioning record.
- Supply-only terms with selection disclaimers for pumps the client chooses.
- Pump station terms with design responsibility, milestones and payment claims.
- Service and breakdown terms with call-out charges and loan pump terms.
- A sales script checklist for performance and running cost statements.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
The pump that could not lift. A farm pump delivers half its rated flow. The specification recorded the depth and pipe run the farmer gave, and the bore was deeper. The installer’s selection was right for the data on paper.
The booster pump on the mains. A homeowner asks a handyman to fit a booster pump to the mains supply. The connection is water plumbing on a reading of section 3, and a licensed plumber later redoes it. The handyman’s invoice for the connection is the weak one.
The pump station paid late. A civil contractor holds back payment for a stormwater pump station. The installer’s payment claims meet section 13(2), so the statutory process is available and the claim moves.
Pump case law
None of the decisions below concerned a pump installer’s contract. Each decides a rule a pump business runs into.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| R E Phillips Nominees Pty Ltd t/as Splash Touch Free Car Wash v Hanna Wash Systems Pty Ltd [2006] SADC 127 | District Court | A system supplied and installed as totally automatic needed manual labour; the distributor and the manufacturer were liable for the loss the misrepresentations caused | [4], [140], [141], [144] |
| Built Environs Pty Ltd v Tali Engineering Pty Ltd [2013] SASC 84 | Supreme Court | An adjudication determination made on a point the parties had no chance to address was void for denial of natural justice | [183], [184], [217], [218] |
Case notes
R E Phillips Nominees Pty Ltd t/as Splash Touch Free Car Wash v Hanna Wash Systems Pty Ltd [2006] SADC 127
A car wash operator bought a touchless automatic car wash system from a Victorian distributor under a written contract for its supply and installation ([3], [4]). It said parts did not work properly and that the system had been represented as totally automatic, able to clean cars without manual labour ([4]). Judge David found a clear connection between the misrepresentations, as to the system’s quality and as to it being automatic, and the operator’s loss ([140]). The manufacturer was liable for the capital loss ([141]), and judgment was given against the distributor and its director, and separately against the manufacturer ([144]). The case was decided under the Trade Practices Act 1974 (Cth); misleading conduct and damages are now dealt with by sections 18 and 236 of the Australian Consumer Law.
Built Environs Pty Ltd v Tali Engineering Pty Ltd [2013] SASC 84
A steel subcontractor’s progress claim was rejected by the head contractor and went to adjudication under the Security of Payment Act ([1] to [3]). Blue J held that, before deciding the prevention principle was invoked, the adjudicator had to call for submissions on it ([183]), and that the denial of natural justice rendered the determination void ([184]). The head contractor was entitled to a declaration and certiorari ([217], [218]).
How we build pump installer terms and conditions
We start with how you select pumps, who gives you the site data and what you promise at handover.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on your licences, pump types, selection process and commercial work | We sort your jobs into domestic pumps, farm and bore pumps, and pump stations |
| 2. Review | Your quotes, selection sheets, brochures, commissioning records and service terms | We mark performance promises, missing site data and licence gaps |
| 3. Drafting | Masters and the pump schedule | We draft your supply and installation terms, station terms and service terms |
| 4. Delivery | Word documents and a commissioning checklist | We brief your sales and service staff on duty points, claims and records |
We cannot promise that terms prevent every dispute. Terms built around the duty point and the commissioning record decide most of them before they start.
Before your next pump quote goes out. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Do you need a licence to install a water pump in SA?
It depends on the connection. On a reading of section 3 of the PGE Act, a pump connected directly or indirectly to the public water supply is water plumbing equipment, needing a plumbing contractor licence. Wiring a pump in is electrical work (PGE Regulations regulation 4(5)(c)(iii)).
Who can wire in a pump?
A licensed electrical contractor using a registered worker (PGE Act sections 6(1), 13). A plug-in pump is exempt, as are primary production installations outside a municipality or township (regulation 4(5)(c)(ii)(A), (iii)).
Is installing a sewage pump station plumbing work?
On a reading of section 3, pumps and pipes that convey wastewater in sanitary drains are part of draining work. A pump-out unit serving an on-site wastewater system is part of that system (Wastewater Regulations regulation 5).
Why put the duty point in a pump contract?
It is the measure of whether the pump does its job. With the site data and who selected the pump, it answers the fitness for purpose question under sections 55 and 61 of the Australian Consumer Law.
Who is responsible if a pump does not perform?
The supplier, where the buyer disclosed the purpose and relied on the supplier’s skill (section 55). Not where the buyer did not rely, or it was unreasonable to rely, on that skill (section 55(3)).
Can a pump business be liable for what its salespeople say?
Yes. Misleading conduct is prohibited (section 18(1)), and loss caused by it can be recovered from the business and anyone involved (section 236(1)).
Can liability be limited for commercial pumps?
For goods or services not ordinarily acquired for household use, it can be limited to repair, replacement or supplying the services again (section 64A), unless that is not fair or reasonable.
Can a pump station contractor use the Security of Payment Act?
Yes, for construction work such as water mains, sewers and drainage installations (section 5(1)(b), (c)), with payment claims that meet section 13(2).
Who registers the manufacturer's warranty on a pump?
The law does not say. The terms should, and should say the warranty sits beside the consumer guarantees, which cannot be excluded (section 64(1)).
Do I need a lawyer for pump installer terms and conditions?
The law does not require one, but a pump job joins a performance promise, licensed connections and commissioning. We draft pump installer terms and conditions for South Australian pump businesses that put the duty point at the centre.
Related trade contract guides
Related guides
- Plumbing and electrical contracts SA
- Irrigation installer terms and conditions SA
- Rainwater tank installer terms and conditions SA
- Septic installer terms and conditions SA
- Drainer terms and conditions SA
- Electrician terms and conditions SA
- Plumber terms and conditions SA
- Trade contracts SA
- Subcontractor agreements
- Equipment hire agreements