Ducted Heating Installer Terms and Conditions SA: Ducted Heating Contracts and Quotes
Book a free 30-minute callCall (08) 7094 2021
Same-day response. Prefer to text? WhatsApp us
Ducted heating installer terms and conditions in South Australia
A ducted heating system is sold on a promise of warm rooms and installed out of sight, in a roof space or under a floor. When a room stays cold, the argument goes back to the quote: which rooms were zoned together, how many outlets the heater was designed to run, and what the customer was told about capacity. Talon Legal drafts ducted heating installer terms and conditions, quotes and builder subcontracts for South Australian businesses that install gas ducted heating, reverse cycle ducted systems and ductwork. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Ducted heating installer terms and conditions SA key facts
| Issue | Position for ducted heating installers in South Australia |
|---|---|
| Governing law | Building Work Contractors Act 1995 (SA) and Regulations 2026; Plumbers, Gas Fitters and Electricians Act 1995 (SA); Gas Act 1997 (SA); Australian Consumer Law. Current to 22 November 2026. |
| Gas ducted heating | Gas fitting is prescribed building work (regulation 4(1)(h)) and needs a gas fitting licence or registration under the Plumbers, Gas Fitters and Electricians Act. |
| Reverse cycle ducted | The installation of air-conditioning in relation to a building is building work (regulation 4(1)(f)). |
| Ductwork alone | Not named in the regulations; it can be building work where it alters or improves the structure (section 3(1)(a)). |
| Insulation | The installation, maintenance, repair and removal of insulation is building work (regulation 4(1)(d)). |
| Gas compliance | The licensed gas fitting contractor must see that the work, examinations and tests meet the regulations (Gas Act section 56). |
| Rectification | The Technical Regulator can direct rectification of an unsafe or non-compliant gas installation, including by whoever did the work in the previous 2 years (Gas Act section 57). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need ducted heating installer terms and conditions? What this guide covers
This guide covers what is particular to ducted heating installer terms and conditions in South Australia, current to 22 November 2026: the licences for gas, reverse cycle and ductwork jobs, zoning and outlets in the quote, ductwork in roof spaces and under floors, gas compliance, supplying the system the quote names, and homeowner contracts. Split system and whole-house air conditioning is covered in the air conditioning installer guide.
We act for gas ducted heating installers, reverse cycle ducted installers, ductwork contractors and the retailers that sell and arrange the installation.
Free Consultation. Send us the quote form and terms your installers leave with customers. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Which licences does a ducted heating job need?
- Zones, outlets and capacity in the quote
- Ductwork in roof spaces and under floors
- Gas ducted heaters: compliance and rectification
- Supplying the system the quote names
- Homeowner contracts and warranties
- What the ducted heating pack holds
- How similar matters tend to play out
- Ducted heating case law
- How we build ducted heating installer terms and conditions
- Frequently asked questions
- Related trade contract guides
Which licences does a ducted heating job need?
The answer depends on what heats the air. A gas ducted heater needs gas fitting to connect it, a reverse cycle ducted system is air-conditioning, and the ductwork itself sits under the general definition of building work.
| Job | Licence position |
|---|---|
| Gas ducted heater | Carrying on business as a gas fitting contractor needs a licence, and the person doing the work must be authorised (Plumbers, Gas Fitters and Electricians Act sections 6(1), 13). Gas fitting is also prescribed building work (regulation 4(1)(h)). |
| Gas fitting contractor | Exempt from the builders licence only for building work its gas fitting licence authorises (regulation 5(1)). |
| Reverse cycle ducted | The installation of air-conditioning is building work (regulation 4(1)(f)), so the business needs a builders licence (section 6(1)) and its technicians need refrigerant handling licences under the Commonwealth refrigerant regulations. |
| Ductwork and outlets | Can be building work under section 3(1)(a) where cutting outlets and fixing ducts alters or improves the structure of the building. |
On a reading of regulation 5(1), a gas fitting contractor’s exemption covers the gas fitting, not the ductwork, outlets and ceiling penetrations. A business that installs complete systems relies on a builders licence for those parts of the job. A business that is unlicensed when it needs to be licensed recovers no fee or other consideration unless a court finds the failure resulted from inadvertence only (section 6(2)).
Zones, outlets and capacity in the quote
A ducted system is designed around zones: the heater is sized to serve a limited number of outlets at once, with day areas and night areas run separately. D.G. Australia, a reverse cycle case, shows why the quote has to say so. A builder’s quote described “a zoned ducted system” with a maximum of six outlets recommended by day ([9]). The installer that did the work quoted a ducted system rated at 16.2 kilowatts, with each area controlled by a motorised damper ([16], [18]). The owner later said she had asked for a system that would run the whole house at once. She lost on that point: the magistrate found she had not conveyed it, and the contract was the written quote ([36], [41]).
| Quote term | What it records |
|---|---|
| Capacity | The rated output in kilowatts |
| Zones | The rooms in each zone and the dampers that control them |
| Outlets | How many outlets the heater is designed to run at once |
| The heat load | The rooms, ceiling heights and insulation the design assumed |
| Controls | Thermostats, zone controllers and their locations |
| Return air | The return air grille location and size |
| Exclusions | Asbestos, structural alterations, electrical upgrades and the removal of old systems |
The customer who tells the installer the purpose, such as heating a particular wing of the house, and relies on its skill gets the benefit of the consumer guarantee that the services and result will be reasonably fit for that purpose (Australian Consumer Law section 61). A quote that writes down the purpose and the zoning is the record of what was promised.
Before your next ducted heating quote goes out. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Ductwork in roof spaces and under floors
Ductwork is installed in the parts of a house nobody inspects. The terms should deal with what the installer finds there.
- Access. The customer gives clear access to the roof space or the subfloor, and the installer is not responsible for stored goods left in the way.
- Insulation. Moving or replacing ceiling insulation is building work in its own right (regulation 4(1)(d)). The quote should say whether disturbed insulation is put back, replaced or excluded.
- Ceilings. Outlets are cut into ceilings; cracking to old plaster around a new outlet should be dealt with as a stated risk, with making good priced or excluded.
- Hazards. A stop-work clause for suspected asbestos, unsafe wiring or vermin damage, with the cost of dealing with them treated as a variation.
- Old systems. Whether the old heater and ducts are removed, left in place or disconnected only.
Work in a roof space can involve a risk of a fall of more than 2 metres, which makes it high risk construction work (Work Health and Safety Regulations regulation 291(a)). A business doing it must have a safe work method statement prepared before the work starts (regulation 299(1)).
Gas ducted heaters: compliance and rectification
A gas ducted heater ends with a compliance obligation that outlasts the job.
- The contractor’s duty. A licensed gas fitting contractor engaged for the work must see that the work and its examinations and tests meet the regulations (Gas Act section 56(1), (3)(a)).
- Certificates. Where a registered gas fitting worker does the work, the notification and certificate of compliance requirements of the regulations must be met (section 56(2)).
- Rectification. The Technical Regulator can direct that an unsafe or non-compliant installation be rectified, including by the person who did the work within 2 years before the direction (section 57).
The terms should make the issue of the certificate of compliance a step before the final invoice is due, and should keep a record of the flue, the clearances and the commissioning readings. If a direction comes later, the record shows what was installed and tested.
Supplying the system the quote names
A ducted heating quote names a heater, a capacity and a duct system. Supply problems arise when a model is out of stock and the installer fits a different one.
Adelaide Marble Specialists is a stonework case, but its lesson carries across. A company supplied and installed bench tops under signed order forms and general terms accepting its quote ([2]). Disputes arose about quality and whether the edges matched the contract, and the work was not finished ([5]). The Master found the company had breached the contract by not supplying in accordance with it ([12]), and the owners recovered damages ([19]); the appeal was dismissed ([75]).
A substitution clause should allow an equal or better model only with the customer’s written approval. In a standard form contract with a consumer or small business, a term that lets one party alone vary the characteristics of the goods or services to be supplied is an example of a term that may be unfair (Australian Consumer Law section 25), and an unfair term is void (section 23).
Homeowner contracts and warranties
Gas fitting, air-conditioning and building work on a house for its owner is domestic building work (regulation 4(2)).
- Under $20,000. Minor domestic building work: the Division 1 rules do not apply (section 27(2)), but the statutory warranties do.
- $20,000 or more. A written contract with all its terms, the licensed name and number, signatures and Form 1 (section 28), with a deposit of no more than 5% (section 30).
- Statutory warranties. Proper work to accepted trade standards and good and proper materials where the business supplies them (section 32(2)(a), (b)); a term that excludes them is void (section 42).
- Consumer guarantees. The services must be rendered with due care and skill (Australian Consumer Law section 60), and a term that purports to exclude, restrict or modify the guarantees is void (section 64).
What the ducted heating pack holds
A ducted heating pack is built from our masters and a ducted heating schedule, and quoted as a fixed fee before we start.
- A quote and acceptance form recording capacity, zones, outlets, heat load assumptions and exclusions.
- Roof space and subfloor terms on access, insulation, ceilings and stop-work hazards.
- A commissioning and compliance record to accompany the final invoice.
- Homeowner terms under $20,000 and a domestic building work contract with Form 1 for larger jobs.
- A substitution and variation form for model changes and added outlets.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
The cold study. A customer says the study at the far end of the house never warms up. The quote put the study in the day zone with the living areas, designed to run five outlets at once. The installer checks the damper and the outlet, finds the zone working as designed, and offers a variation to add a zone.
The out of stock heater. The model in the quote is unavailable. The installer proposes a heater of the same rated output from the same range, explains the difference in writing and fits it only after the customer signs the substitution form.
The cracked ceiling. A new outlet is cut into an old lath and plaster ceiling and the plaster around it cracks. The quote listed cracking of old ceilings around new outlets as a stated risk, with patching priced separately.
Ducted heating case law
None of the decisions below concerned a gas ducted heater. Each turned on what the quote and the contract said a supplier would provide.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| D.G. Australia Pty Ltd v Alexander [2003] SASC 176 | Supreme Court | A ducted system quoted on a zoned basis was the contract; the claim that a larger system was agreed failed | [9], [16], [18], [36], [37], [41], [104] |
| Adelaide Marble Specialists Pty Ltd v Ragunath [2023] SASC 139 | Supreme Court | A supplier that did not supply in accordance with the contract was liable in damages; the appeal was dismissed | [2], [5], [12], [19], [75] |
Case notes
D.G. Australia Pty Ltd v Alexander [2003] SASC 176
An owner building a new house had a builder’s quote for a zoned ducted system, with a recommended maximum of six outlets by day ([9]). The contractor that did the work quoted a reverse cycle ducted split system of 16.2 kilowatts with each area controlled by a motorised damper ([16], [18]). The owner said she had asked for a bigger unit to cool the whole house at once; the magistrate found she had not conveyed that, and Perry J would not interfere ([36]). The engineer called for the owner accepted that, once a damper and some leaks were attended to, the system could cool satisfactorily on a zoned basis ([37]), and the contract was the written quote ([41]). The appeal was dismissed ([104]), and leave to appeal further was refused ([2003] SASC 351 at [15]).
Adelaide Marble Specialists Pty Ltd v Ragunath [2023] SASC 139
The contract to supply and install kitchen and pantry bench tops and splashbacks was made of signed order forms and general terms accepting a quote ([2]). Part way through, disputes arose about quality and whether the bench top edges were as contracted, and the work was not completed ([5]). The Master found the company had breached the contract by not supplying the bench tops in accordance with it ([12]), and assessed damages at $15,230.87 ([19]). Kimber J dismissed the company’s appeal ([75]).
How we build ducted heating installer terms and conditions
We start with what you install: gas, reverse cycle or ductwork, new homes or replacements, homeowners or builders.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on your licences, products, suppliers and the jobs you take on | We match the builders, gas fitting and refrigerant licences to the work |
| 2. Review | Your quote form, terms and recent complaints about cold rooms or ceilings | We mark the gaps on zoning, heat load, access and substitutions |
| 3. Drafting | Masters and the ducted heating schedule | We draft the quote, homeowner contracts, roof space terms and compliance record |
| 4. Delivery | Word documents ready for your next quote | We brief your estimators on recording zones and purpose |
We cannot promise that terms stop every complaint about a cold room. A quote that records the zones, the outlets and the heat load assumptions turns the complaint into a check against the design.
When a customer says a room stays cold. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Is a ducted heating quote template enough in SA?
Not on its own. A template that is not written for South Australia will not match the licences to the job, record the zones and outlets, or deal with the $20,000 homeowner contract rules and the gas compliance steps.
Does a ducted heating installer need a builders licence?
It depends on the job. Installing reverse cycle ducted air-conditioning is building work (regulation 4(1)(f)). Gas fitting is prescribed building work, but a gas fitting contractor is exempt from the builders licence for work its gas licence authorises (regulation 5(1)). Ductwork can be building work under section 3(1)(a).
Who issues the compliance certificate for a gas ducted heater?
The gas fitting work must meet the regulations, including their notification and certificate of compliance requirements (Gas Act section 56). The terms should make the certificate a step before the final payment.
Can a gas heater installer be ordered to fix an old job?
Yes. The Technical Regulator can direct rectification of an unsafe or non-compliant installation by the person who did the work within 2 years before the direction (Gas Act section 57).
What should a ducted heating quote say about zones?
Which rooms are in each zone, how many outlets the heater is designed to run at once, and the capacity in kilowatts. In D.G. Australia, a claim that a larger whole-house system was agreed failed against the written quote ([41]).
Is disturbing ceiling insulation building work?
The installation, maintenance, repair and removal of insulation is building work (regulation 4(1)(d)). The quote should say whether insulation moved for ductwork is put back or replaced.
Can a ducted heating installer substitute a different heater model?
Only as the contract allows. A term letting one party alone vary the characteristics of the goods supplied is an example of a term that may be unfair (Australian Consumer Law section 25), so the safer course is a substitution clause requiring the customer’s written approval.
When does a ducted heating job need Form 1?
When it is domestic building work on a house costing $20,000 or more. The contract must then comply with section 28, including Form 1, and the deposit is limited to 5% (section 30).
Does roof space work need a safe work method statement?
Where it involves a risk of a person falling more than 2 metres it is high risk construction work (regulation 291(a)), and a safe work method statement must be prepared before it starts (regulation 299(1)).
Do I need a lawyer for ducted heating installer terms and conditions?
The law does not require one, but the licences, the zoning record and the homeowner contract rules meet in the same quote. We draft ducted heating installer terms and conditions for South Australian installers who want the quote to answer the cold room complaint.
Related trade contract guides
Related guides
- Plumbing and electrical contracts SA
- Air conditioning installer terms and conditions SA
- Heater and flue installer terms and conditions SA
- Gas fitter terms and conditions SA
- Ventilation installer terms and conditions SA
- Renovation builder terms and conditions SA
- Statutory warranties and defects
- Minor domestic building work SA
- Trade contracts SA
- Subcontractor agreements