Kit Home Builder Terms and Conditions SA: Kit and Transportable Home Contracts
Kit home builder terms and conditions in South Australia
Kit and transportable home businesses in South Australia sell one of three things: a kit of parts, a kit erected on the owner’s land, or a finished home built in a factory and moved to site. The law that governs the contract changes with the model. A kit sold on its own is goods under the Australian Consumer Law; a kit supplied and erected for an owner is domestic building work under the Building Work Contractors Act 1995 (SA), with the deposit, payment, insurance and warranty rules that follow. Talon Legal drafts kit home and transportable home contracts, terms and conditions and erector subcontracts for South Australian businesses. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Kit home builder terms and conditions SA key facts
| Issue | Position for kit and transportable home businesses in South Australia |
|---|---|
| Governing law | Building Work Contractors Act 1995 (SA) and Regulations 2026; Australian Consumer Law; Personal Property Securities Act 2009 (Cth); Security of Payment Act 2009 (SA). Current to 20 November 2026. |
| Kit supplied only | A supply of goods. To a consumer, the kit carries the guarantees of acceptable quality, fitness for a disclosed purpose and correspondence with description (Australian Consumer Law sections 54 to 56). |
| Kit supplied and erected | Constructing a house for an owner is domestic building work (section 3). At $20,000 or more, a section 28 contract with Form 1. |
| Arranging the erection | "Perform" includes causing, organising or arranging building work (section 3), so a business that contracts to supply and erect, and books others to erect, performs the work and needs a licence (section 6(1)). |
| Deposit | On a supply and erect contract of $20,000 or more, not more than 5% of the contract price (section 30(4)). |
| Progress payments | Only genuine progress payments for work already performed (section 30(1)). |
| Insurance | Where the erection needs development approval, building indemnity insurance before work starts (sections 33(2), 34). |
| Habitation warranty | Erecting a kit house is the construction of a house, so the warranty of reasonable fitness for human habitation applies (section 32(2)(e)). |
| Title before fixing | Retention of title over components is a security interest under the PPSA (section 12); once components become fixtures, the PPSA does not apply to an interest in them (section 8(1)(j)). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need kit home builder terms and conditions? What this guide covers
This guide covers what is particular to kit home builder terms and conditions in South Australia, current to 20 November 2026: which model your business runs and the law each one engages, the licence position when you arrange erection, deposits and payments for components made in a factory, the consumer guarantees on a kit sold on its own, delivery and site readiness, title to components before they are fixed, and the warranties on an erected home. The rules shared by every builder are in the builder contracts SA guide.
We act for kit home suppliers, transportable and modular home builders, and erectors who work for kit companies and owners.
Free Consultation. Send us your kit contract, supply terms or erector subcontract. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Supply only, supply and erect, or built and delivered
- Who needs a builders licence in the kit model?
- Deposits and paying for factory work
- Consumer guarantees on a kit sold on its own
- Delivery, cranes and site readiness
- Title to components before they are fixed
- Warranties on an erected kit home
- What the kit home pack holds
- How similar matters tend to play out
- Kit home contract case law
- How we build kit home builder terms and conditions
- Frequently asked questions
- Related trade contract guides
Supply only, supply and erect, or built and delivered
The contract a kit business needs depends on what it sells. The same company often runs more than one model, and a contract written for one does not fit the others.
| Model | What the business sells | The law that governs the contract with an owner |
|---|---|---|
| Supply only | A kit of frames, cladding, roofing and fittings, delivered to the owner, who engages others to erect it | A supply of goods: the Australian Consumer Law guarantees for goods (sections 54 to 57); the Building Work Contractors Act does not govern the supply itself |
| Supply and erect | The kit, erected on the owner's land by the business or by erectors it engages | A domestic building work contract (section 3); Part 5 applies, and Division 1 at $20,000 or more |
| Built and delivered | A transportable home built in a factory, delivered and placed on footings | On a reading of section 3, the placement, footings and connections are building work for the owner, and a contract that includes them is a domestic building work contract |
| Supply to builders | Kits or components sold to licensed builders who build for their own clients | A supply of goods to a business; the Security of Payment Act can apply, because related goods include materials and components (section 6) |
The model has to be decided before the contract is written, and the sales team has to sell the model the contract describes. A business that sells “supply only” but sends its own erection crew on a “recommended installer” basis has, on a reading of section 3, moved into supply and erect.
Who needs a builders licence in the kit model?
A building work contractor is a person who carries on the business of performing building work for others (section 3), and “perform” includes causing, organising or arranging the work (section 3). A business that contracts with an owner to supply and erect a kit, and books its own crews or subcontract erectors to do the erection, performs that building work and needs a building work contractors licence (section 6(1)). The maximum fine for carrying on business without one is $100,000 for an individual and $500,000 for a company, and an unlicensed contractor is not entitled to any fee or other consideration under or in relation to the contract unless a court finds the failure resulted from inadvertence only (section 6(2)).
Two further licence points apply to the kit model.
- Erectors. A licensed kit company that engages an erector to carry out building work on its behalf must check that the erector is licensed for the work (section 47A).
- The licence’s kind of work. The licence must cover residential construction of the size the company sells, and building work needs an approved registered building work supervisor (section 12).
A supply-only business that does not perform or arrange the erection is not, on a reading of section 3, performing building work. Its terms should say so plainly, and it should not hold out that it will arrange erection.
Deposits and paying for factory work
Kit businesses commit to materials and factory time as soon as an order is signed, and their payment terms tend to reflect that. On a supply and erect contract for an owner, the Building Work Contractors Act limits what can be demanded.
| Payment | The rule on a supply and erect contract of $20,000 or more |
|---|---|
| Deposit | Not more than 5% of the contract price (section 30(4)) |
| Third-party fees, the insurance premium, statutory fees | Prescribed payments that can be requested separately (section 30(2a)) |
| Payments during manufacture | Only genuine progress payments for work already performed (section 30(1)) |
| Payments during erection | Genuine progress payments for erection work already performed, each requested in writing unless the Security of Payment Act applies (section 30(1), (3)) |
Section 30(1) speaks of work already performed. On a reading of that subsection, a claim for components still in the factory sits uneasily with it, and a schedule that ties claims to delivery of the components to site and to erection stages is the safer structure. The maximum fine for demanding a payment the section does not allow is $100,000, or $500,000 for a company.
On a supply-only sale of goods, the Building Work Contractors Act’s payment rules do not apply to the supply, and the terms decide the deposit, subject to the unfair contract terms rules for consumer contracts in standard form (Australian Consumer Law sections 23 to 25). A business should not use a supply-only document to take a large deposit for a kit it will also erect, because separate contracts for staged work at a site, made under one arrangement, are treated as one domestic building work contract (section 3(2)).
Consumer guarantees on a kit sold on its own
A kit supplied in trade or commerce to a consumer comes with guarantees that cannot be excluded (Australian Consumer Law sections 54 to 57, 64). A person acquires goods as a consumer if the amount paid is not more than $100,000, or if the goods are of a kind ordinarily acquired for personal, domestic or household use (section 3(1); Competition and Consumer Regulations regulation 77A).
| Guarantee | What it means for a kit |
|---|---|
| Acceptable quality (section 54) | The kit must be fit for the purposes kits of that kind are commonly supplied for, acceptable in appearance and finish, free from defects, safe and durable, judged by a reasonable consumer who knows its condition, including hidden defects |
| Fitness for a disclosed purpose (section 55) | Where the owner makes a particular purpose known, such as a bushfire area or a coastal site, the kit must be reasonably fit for it |
| Correspondence with description (section 56) | The kit must match its description in the brochure, specification and order |
| Sample or demonstration model (section 57) | A kit sold by reference to a demonstration model must correspond with it in quality, state or condition |
A term that purports to exclude, restrict or modify these guarantees is void to that extent (section 64(1)). A kit company’s terms can still allocate what the guarantees leave open: the owner’s responsibility for the site, the footings and the erection where the company does not erect, and the effect of erection by others on the kit’s components.
Delivery, cranes and site readiness
Kits and transportable homes arrive on trucks, and much of what goes wrong happens on delivery day.
- Site readiness. The contract should define a ready site: access for the truck and crane, a clear set-down area, footings or a slab complete and certified, and services ready where the home needs them.
- Access and cranes. Who pays for a larger crane, traffic control or a road closure where the access is not as described, and what happens when the truck cannot reach the site.
- Risk in transit. When risk in the components passes to the owner, and who insures them between delivery and erection.
- Checking the delivery. An inspection of the components on delivery against the packing list, with a short period to report shortages and damage.
- Storage on site. Who is responsible for protecting delivered components from weather and theft until they are erected.
Each of these is a contract point rather than a statutory rule. A kit company that leaves them out finds them argued after the delivery has gone wrong.
Title to components before they are fixed
A kit company usually wants to keep ownership of the components until it is paid. A retention of title term is a security interest under the Personal Property Securities Act, which treats a conditional sale agreement, including an agreement to sell subject to retention of title, as one (section 12(1), (2)(d)). Enforcing it against third parties depends on the Act’s attachment and enforceability rules (section 20).
The protection ends when the components are built in. The PPSA does not apply to an interest in a fixture (section 8(1)(j)), and fixtures are goods that are affixed to land (section 10). Once a kit is erected, retention of title over its frames and cladding does little; the company’s protection then lies in its payment terms and, on an owner’s contract, the progress payment rules.
A charging clause that gives the company an interest in the owner’s land is a separate matter. On a domestic building work contract it must state the four prescribed matters, including that the owner is advised to get independent legal advice (regulation 16).
Warranties on an erected kit home
A kit home erected for an owner is the construction of a house, so, on a reading of section 32(2)(e), the contract carries the warranty that the house will be reasonably fit for human habitation, in addition to the warranties that apply to all domestic building work (section 32(2)). Those include the warranty that the materials the contractor supplies will be good and proper (section 32(2)(b)), which on a supply and erect contract covers the kit itself.
| Party | Who the owner looks to |
|---|---|
| Supply and erect company | The statutory warranties in its contract with the owner, for the kit and the erection (section 32(2)) |
| Supply-only company | The Australian Consumer Law guarantees for the kit (sections 54 to 57) |
| Erector engaged by the owner | The statutory warranties in the erector's own contract with the owner, for the erection |
| Erector engaged by the kit company | Its subcontract with the company; a subcontract is not a domestic building work contract (section 3) |
Proceedings for breach of a statutory warranty must start within five years after the work is completed (section 32(5)), and the warranties cannot be excluded (section 42). The statutory warranties and defects guide covers each one.
What the kit home pack holds
A kit home pack is built from our masters and a kit home schedule, and quoted as a fixed fee before we start.
- Supply-only terms of sale for owners and for builders, with a delivery and inspection procedure and the consumer guarantee position stated accurately.
- A supply and erect contract with Form 1, a payment schedule tied to delivery and erection stages, and a 5% deposit.
- A transportable home contract covering factory build, transport, placement, footings and connections.
- A site readiness checklist and a delivery acceptance form.
- Retention of title terms for components before they are fixed.
- An erector subcontract with licence, supervision and defects terms.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
A 30% deposit for a supply and erect kit. A company’s standard terms take 30% of a $210,000 supply and erect contract when the order is signed, to fund manufacture. For an owner’s contract of $20,000 or more, the deposit cannot exceed 5%, so $10,500, and later claims must be progress payments for work already performed. The company restructures its schedule around delivery of the components to site and the erection stages.
A supply-only kit with a recommended erector. A company sells kits supply only and refers owners to an erector it works with. When an owner asks the company to “book the erector”, the company takes a booking fee and sends its preferred crew. On a reading of section 3, the company is now organising the building work. Its documents, and its licence, need to match what it does.
Cladding that does not match the brochure. An owner who bought a kit supply only finds the cladding profile differs from the one described in the brochure. The guarantee that goods supplied by description correspond with the description applies (section 56), and a term excluding it would be void (section 64). The company’s terms deal with how substitutions are notified and approved before dispatch.
Kit home contract case law
None of the decisions below concerned a kit home. They decide points about licensing that apply to any business that performs or arranges building work, including a kit company that arranges erection.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| Tagara Builders Pty Ltd v AP & L Services Pty Ltd [2015] SASC 30 | Supreme Court | An unlicensed contractor without an inadvertence finding has no right to progress payments under the Security of Payment Act; section 6(2) does not bar a claim in quantum meruit | [50], [51] |
| Allied Grain Systems Pty Ltd v Inheritance Capital Asset Management Pty Ltd [2023] SASC 175 | Supreme Court | Inadvertence under section 6(2)(b) can be satisfied where the failure to be licensed came from ignorance of the obligation, unless there was a wilful failure to inquire or reckless indifference | [39], [41] |
Case notes
Tagara Builders Pty Ltd v AP & L Services Pty Ltd [2015] SASC 30
A company that held no licence of its own, although its director held one with conditions ([11]), obtained an adjudication under the Security of Payment Act. Blue J held that, without a finding that the failure resulted from inadvertence only, section 6(2) disentitled the company to the contract price and so to progress payments under that Act, and the adjudication was void ([51]). Section 6(2) did not prevent a claim for the value of the work in quantum meruit ([50]).
Allied Grain Systems Pty Ltd v Inheritance Capital Asset Management Pty Ltd [2023] SASC 175
Stanley J held that the inadvertence exception in section 6(2)(b) is satisfied where the failure to hold a licence results from ignorance of the obligation, unless that ignorance came from a wilful failure to inquire or reckless indifference ([39]), and made a finding of inadvertence only on the facts ([41]). For a kit company, the decision shows the exception exists; it is not a substitute for holding the right licence.
How we build kit home builder terms and conditions
We start with your model: what you sell, who erects, how you are paid during manufacture, and whether you sell to owners, builders or both.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on your models, sales process, deposits, delivery and erectors | We map each model against the Australian Consumer Law, Part 5 and the licence rules |
| 2. Review | Your order forms, terms of sale, brochures and erector agreements | We mark what fails section 30, what the consumer guarantees override and what the unfair terms rules would strike out |
| 3. Drafting | Masters and the kit home schedule | We draft a document for each model, your site readiness checklist and your erector subcontract |
| 4. Delivery | Word documents ready for quoting and e-signing | We brief your sales team on which document each sale needs |
We cannot promise that terms prevent every dispute. Terms that match the model you actually sell decide most of them before they start.
Before your next kit leaves the factory. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Is selling a kit home building work in SA?
Not if the business only supplies the kit. On a reading of section 3, a supply of a kit is a supply of goods. If the business contracts to supply and erect it, or arranges the erection, it performs building work, because “perform” includes causing, organising or arranging (section 3).
How much deposit can a kit home company take?
On a supply and erect contract with an owner of $20,000 or more, not more than 5% of the contract price (section 30(4)). On a supply-only sale, the Building Work Contractors Act does not set the deposit, but the terms are subject to the unfair contract terms rules.
Does a kit home company need a builders licence?
If it supplies and erects, or arranges the erection, yes (sections 3, 6(1)). A supply-only business that does not perform or arrange building work does not, on a reading of section 3.
What guarantees apply to a kit home sold supply only?
To a consumer, the Australian Consumer Law guarantees of acceptable quality, fitness for a disclosed purpose, correspondence with description and, where relevant, correspondence with a demonstration model (sections 54 to 57). They cannot be excluded (section 64).
Can a kit company keep ownership of the kit until it is paid?
Until the components are fixed, yes, through a retention of title term, which the PPSA treats as a security interest (section 12). Once components become fixtures, the PPSA does not apply to an interest in them (section 8(1)(j)).
Does an erected kit home carry the habitation warranty?
On a reading of section 32(2)(e), yes, because erecting a kit house for an owner is the construction of a house.
Does a kit home need building indemnity insurance?
On a supply and erect contract of $20,000 or more, where the work needs development approval, the policy must be in force, and the certificate given to the owner, before work starts (sections 33(2), 34).
Who is liable if the erector makes a mistake?
The contractor the owner engaged. If the kit company supplied and erected, the statutory warranties in its contract cover the erection, whoever it engaged to do it (section 32(2)). If the owner engaged the erector, the erector’s own contract carries them.
Can a kit company split the sale into a supply contract and an erection contract?
It can, but if both are staged work at the site under one arrangement, Part 5 treats them as a single domestic building work contract (section 3(2)), and the deposit limit applies to the combined price.
Do I need a lawyer for kit home builder terms and conditions?
The law does not require one, but a kit business runs several models with different laws, and a single form rarely fits them all. We draft kit home builder terms and conditions for South Australian businesses that fit each model you sell.
Related trade contract guides
Related guides
- Builder contracts SA
- New home builder terms and conditions SA
- Granny flat builder terms and conditions SA
- Garage builder terms and conditions SA
- Trade contracts SA
- Domestic building work contracts
- Building deposits and progress payments
- Builders licence SA
- Terms of trade and retention of title
- Subcontractor agreements