Modular Building Installer Terms and Conditions SA: Contracts for Installing Modular and Prefabricated Buildings
Modular building installer terms and conditions in South Australia
A modular building is made in a factory, carried on a truck, lifted by a crane and joined on site, and each step can belong to a different business. The contract has to say who the builder is, when the module becomes the client’s risk, and who fixes a leak at the join between two modules. Talon Legal drafts modular building installer terms and conditions, installation subcontracts and site readiness terms for South Australian modular and prefabricated building installers. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Modular building installer terms and conditions SA key facts
| Issue | Position for modular building installers in South Australia |
|---|---|
| Governing law | Building Work Contractors Act 1995 (SA) and Regulations 2026; Building and Construction Industry Security of Payment Act 2009 (SA). Current to 21 November 2026. |
| Who performs the work | "Perform" includes cause, organise or arrange (section 3), so a maker that sells a module installed performs the building work, whoever installs it. |
| Licences | A business that carries on business as a building work contractor must be licensed (section 6(1)), and a licensed contractor must not contract with an unlicensed person to carry out building work on its behalf, unless that person is exempt (section 47A). |
| Factory work | Prefabrication of components on or off site is construction work (Security of Payment Act section 5(1)). Materials and components count in valuing a claim only once they are, or on payment will be, the client's property (section 10). |
| Homeowner contracts | Domestic building work of $20,000 or more needs a written contract with Form 1, a deposit of no more than 5% and progress payments only for work already performed (sections 28, 30). |
| Warranties | On a reading of sections 3 and 32(2), the statutory warranties are implied in the contract with the owner, not in an installation subcontract; subcontract disputes can be joined in the Magistrates Court (section 37(4)). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need modular building installer terms and conditions? What this guide covers
This guide covers what is particular to modular building installer terms and conditions in South Australia, current to 21 November 2026: who the builder is when a factory, a carrier and an installer are involved, delivery, craneage and site readiness, paying for work done in the factory, interface defects, and getting paid on an installation subcontract. The rules shared by every builder are in the builder contracts SA guide.
We act for modular installers, transportable building businesses and the builders who engage them.
Free Consultation. Send us your installation subcontract, your site readiness checklist or a module that arrived damaged. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Who is the builder: maker, installer or both?
- Delivery, craneage and site readiness
- Paying for work done in the factory
- Interface defects and the maker's share
- Getting paid on an installation subcontract
- What the modular installation pack holds
- How similar matters tend to play out
- Modular installation case law
- How we build modular building installer terms and conditions
- Frequently asked questions
- Related trade contract guides
Who is the builder: maker, installer or both?
Erecting a building is building work (section 3), and “perform” includes causing, organising or arranging the work (section 3). Who the builder is depends on who contracts with the client for the installed result.
| Arrangement | Who contracts with the client | Position |
|---|---|---|
| The maker sells the module installed and engages an installer | The maker | The maker performs the building work and needs a licence (section 6(1)); the installer, as its subcontractor, needs one too (sections 6(1), 47A) |
| The client buys the module and engages an installer separately | The maker for the goods; the installer for the installation | The installer's contract covers the installation and connection work, priced on its own |
| A builder buys the modules and delivers the finished building | The builder | The builder performs the whole job; the maker is a supplier of goods to the builder |
A domestic building work contract does not include a subcontract (section 3), so the installation subcontract in the first arrangement sits outside Part 5. Where the client is a homeowner and the maker sells the module installed, the maker’s contract with the owner is the domestic building work contract.
Building work is development (Planning, Development and Infrastructure Act section 3(1)), and, subject to that Act, no development may be undertaken unless it is approved (section 101). Where development approval is required and the work is not minor, building indemnity insurance must be in force, and the certificate given, before the work is performed (Building Work Contractors Act sections 33(2), 34).
Delivery, craneage and site readiness
Installation contracts fail on the day the truck arrives. The terms should allocate each of these before it happens:
- Site readiness. Footings, set-out, levels, service connection points and a clear access route, who provides each, and a checklist signed before delivery is booked.
- Craneage. Who books and pays for the crane, the crane pad, traffic management and road closures, and the standby rate if the site is not ready.
- Weather. Who decides that a lift is unsafe, and how a lost day is rebooked and paid.
- Risk in transit. When the module becomes the client’s risk (at the factory gate, on arrival or on placement), and who insures it in transit.
- Inspection on arrival. A joint inspection on delivery, with damage photographed and noted on the delivery record before the module is lifted.
Paying for work done in the factory
A module is largely built before it reaches the site, and the payment terms need to deal with that.
- Commercial work. Prefabrication of components on or off site is construction work under the Security of Payment Act (section 5(1)). Materials and components are valued in a claim only if they have become, or on payment will become, the property of the party for whom the work is done (section 10), so the contract should say when title passes.
- Homeowner work. A builder may demand only a genuine progress payment for work already performed, or a prescribed payment such as a deposit of no more than 5% (section 30(1), (2a), (4)). On a reading of section 30(1), a payment for a module still in the factory is harder to justify than one for a module delivered and placed, so milestones tied to delivery, placement and connection are safer.
- Goods supplied separately. Where the client buys the module directly from the maker, the maker’s own terms govern its payment, and the installer’s contract covers the installation only.
Interface defects and the maker’s share
The joins between modules, the weatherproofing between them, and the connections to services are where defects appear, and where maker and installer each blame the other.
- The owner’s warranties. In a domestic building work contract, section 32(2) implies warranties that the work will be performed in a proper manner to accepted trade standards and in accordance with the agreed plans and specifications, with good and proper materials and in accordance with statutory requirements.
- Back to back. The maker’s subcontract with the installer should mirror those standards for the installation, set out the installer’s interface work, and require the installer to report factory defects found on arrival.
- A defects register. A joint register at handover that records each defect and assigns it to factory or installation.
- Joining the installer. In the Magistrates Court, a subcontract dispute about domestic building work can be brought and joined with the owner’s dispute (section 37(4), (5)).
Getting paid on an installation subcontract
- Payment claims. A claim must identify the work, state the claimed amount and state that it is made under the Act (section 13(2)).
- Pay when paid. A clause that makes the installer’s payment depend on the maker being paid by its client has no effect (section 12).
- Payment schedules. A respondent that gives no schedule within the contract time or 15 business days, whichever expires earlier, becomes liable for the claimed amount (section 14(4)).
- Suspension. Where a respondent does not pay, the Act lets the claimant recover the amount as a debt or apply for adjudication, and give notice of suspension that states it is made under the Act (sections 15, 16). Stopping work and setting new conditions is a different matter: in Kennett, below, a subcontractor that suspended work and set conditions for its return was held to have repudiated the subcontract.
- Adjudication. In Built Environs, below, an adjudicator who decided the prevention principle applied without inviting submissions on it denied natural justice, and the determination was void.
What the modular installation pack holds
A modular installation pack is built from our masters and a modular installation schedule, and quoted as a fixed fee before we start.
- Installation terms for work direct to clients, with site readiness, craneage and risk clauses.
- An installation subcontract for makers who sell modules installed, back to back with their client contract.
- A site readiness checklist and a delivery inspection record.
- A defects register that assigns each defect to factory or installation.
- Payment claim and payment schedule forms.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
The site that was not ready. The crane arrives and the footings are not finished. The contract put site readiness on the client, required a signed checklist before booking, and set a standby rate, so the installer recovers the cost of the lost day.
The module with the cracked wall. A module arrives with a cracked internal lining. The joint inspection recorded the damage before the lift, and the contract placed transit risk on the maker, so the installer is not drawn into the repair.
The installer who walked off. An installer, unpaid on two claims, stops work and says it will return only when paid in full and given a new price. The contract and the Security of Payment Act give it routes to be paid; walking off and setting new terms risks being treated as repudiation, as in Kennett.
Modular installation case law
None of the decisions below concerned a modular building. Each decides a rule an installation contract runs into.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| Kennett Pty Ltd v Janssen [2014] SASC 164 | Supreme Court | A subcontractor that suspended work and set conditions for its return repudiated the subcontract; the builder lawfully terminated and recovered damages | [4], [155], [259] |
| Built Environs Pty Ltd v Tali Engineering Pty Ltd [2013] SASC 84 | Supreme Court | An adjudicator who decided the prevention principle applied without inviting submissions on it denied natural justice; the determination was void | [1] to [3], [183], [184], [217], [218] |
Case notes
Kennett Pty Ltd v Janssen [2014] SASC 164
A commercial builder ([4]) engaged a bricklaying subcontractor for a health care facility at $423,080, and the parties fell out over progress and variation claims. The subcontractor suspended work and set conditions for its return. Blue J held that conduct was repudiatory ([155]). The builder lawfully terminated, had judgment for damages of $226,212.22, and the subcontractor’s counterclaim was dismissed ([259]).
Built Environs Pty Ltd v Tali Engineering Pty Ltd [2013] SASC 84
A steel subcontractor’s progress claim was rejected by the head contractor and went to adjudication under the Security of Payment Act ([1] to [3]). Blue J held that, before deciding the prevention principle was invoked, the adjudicator had to call for submissions on it ([183]), and that the denial of natural justice rendered the determination void ([184]). The head contractor was entitled to a declaration and certiorari ([217], [218]).
How we build modular building installer terms and conditions
We start with where you sit in the chain: maker, installer, or builder buying modules.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on your licence, the makers and clients you work with, your crane arrangements and your job sizes | We identify who the builder is on each kind of job |
| 2. Review | Your quotes, subcontracts, delivery records and defects lists | We mark risk and readiness gaps, pay when paid clauses and factory payments that need milestones |
| 3. Drafting | Masters and the modular installation schedule | We draft your terms, subcontract, readiness checklist and defects register |
| 4. Delivery | Word documents and a delivery inspection record | We brief your crews on inspection, records and payment claims |
We cannot promise that terms prevent every dispute. Terms that match how modules are made, moved and joined decide most of them before they start.
Before your next installation is booked. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Does a modular building installer need a builders licence in SA?
Yes. Erecting a building is building work (section 3), and a business that carries out building work for others must be licensed (section 6(1)).
Is the factory that sells a module installed the builder?
On a reading of section 3, yes. “Perform” includes causing, organising or arranging the work, so a maker that contracts to supply and install performs the building work and needs a licence.
Can a licensed maker use an unlicensed installer?
Not for building work. A licensed contractor must not contract with an unlicensed person to carry out building work on its behalf, unless that person is exempt (section 47A).
Can I claim payment for modules still in the factory?
Under the Security of Payment Act, prefabrication off site is construction work (section 5(1)), but materials and components are valued only if they have become, or on payment will become, the client’s property (section 10). Homeowner contracts are limited to genuine progress payments for work already performed (section 30(1)).
Who is responsible for a module damaged in transport?
The contract decides it. State when risk passes, who insures the module in transit, and require a joint inspection before the lift.
Who fixes leaks at the joins between modules?
The contract should assign interface work to the installer or the maker and keep a joint defects register at handover. In a homeowner job, the owner’s warranties are implied in the contract with the owner (section 32(2)).
Does a modular home need development approval?
Building work is development (Planning, Development and Infrastructure Act section 3(1)), and, subject to that Act, no development may be undertaken unless it is approved (section 101). The contract should name who obtains the approval.
Does building indemnity insurance apply to modular homes?
Where development approval is required and the contract is $20,000 or more, a complying policy must be in force, and the certificate given to the owner, before the work is performed (sections 33(2), 34).
Can I stop work if the maker does not pay me?
The Security of Payment Act gives its own routes, including recovery as a debt, adjudication and a notice of suspension that states it is made under the Act (sections 15, 16). Suspending work and setting conditions for a return was held repudiatory in Kennett ([155]).
Do I need a lawyer for modular building installer terms and conditions?
The law does not require one, but modular work splits one building across several businesses. We draft modular building installer terms and conditions for South Australian installers that keep each step allocated.
Related trade contract guides
Related guides
- Builder contracts SA
- Kit home builder terms and conditions SA
- Granny flat builder terms and conditions SA
- Commercial builder terms and conditions SA
- New home builder terms and conditions SA
- Domestic building work contracts SA
- Building deposits and progress payments SA
- Builders licence SA
- Trade contracts SA
- Subcontractor agreements