Plasterboard Fixer Terms and Conditions SA: Fixing and Setting Subcontracts
Plasterboard fixer terms and conditions in South Australia
A plasterboard crew can fix and set a house in a week and then wait months to be paid for it. The money depends on two things a template does not check: whether the business that signed the subcontract holds a builders licence in its own name, and whether the paperwork supports a payment claim under the Security of Payment Act. Talon Legal drafts plasterboard fixer terms and conditions, fixing and setting subcontracts and payment claim procedures for South Australian plasterboard businesses. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Plasterboard fixer terms and conditions SA key facts
| Issue | Position for plasterboard fixers in South Australia |
|---|---|
| Governing law | Building Work Contractors Act 1995 (SA) and Regulations 2026; Building and Construction Industry Security of Payment Act 2009 (SA); Australian Consumer Law. Current to 22 November 2026. |
| Fixing and setting | Part of constructing, altering or repairing a building, so it is building work (section 3). |
| Whose licence | The business that contracts and performs the work needs the licence (section 6(1)); in Tagara, a director's licence did not cover the director's company. |
| Licence conditions | A licence can carry conditions (section 7); in Tagara the director's licence was limited by contract value and by storeys. |
| Without a licence | No fee or other consideration unless a court finds the failure resulted from inadvertence only (section 6(2)); in Tagara, no progress payments under the Security of Payment Act. |
| Builders | A licensed builder must not contract with an unlicensed person to carry out building work on its behalf (section 47A). |
| Payment claims | Identify the work, state the amount and say the claim is made under the Act (section 13(2)). |
| No payment schedule | The builder becomes liable for the claimed amount if no schedule arrives within the subcontract time or 15 business days, whichever is earlier (section 14(4)). |
| Pay when paid | No effect (section 12). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need plasterboard fixer terms and conditions? What this guide covers
This guide covers what is particular to plasterboard fixer terms and conditions in South Australia, current to 22 November 2026: whose name the licence is in, how fixing and setting rates are measured, the finish the price allows for, payment claims and schedules, company clients that do not pay, and homeowner jobs. The law shared with plasterers, ceiling fixers and other finishing trades is in the finishing trades contracts SA guide.
We act for plasterboard fixers and setters, labour-only crews and supply-and-fix plasterboard contractors working for builders, renovators and fit-out companies.
Free Consultation. Send us the subcontract a builder wants you to sign, or the payment claim you are about to serve. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Whose name is on the licence?
- Fixing and setting rates in the subcontract
- The finish and the trades that follow
- Payment claims and payment schedules
- When a company client will not pay
- Homeowner and renovation jobs
- What the plasterboard pack holds
- How similar matters tend to play out
- Plasterboard case law
- How we build plasterboard fixer terms and conditions
- Frequently asked questions
- Related trade contract guides
Whose name is on the licence?
Fixing and setting plasterboard is building work (section 3), and a business that performs building work for others needs a building work contractors licence (section 6(1)). The licence has to be held by the party that signs the subcontract and does the work. A crew that trades through a company needs the company licensed; the director’s personal licence is not enough.
Tagara shows what turns on it. A company that supplied and installed ceilings and linings on a two storey building under a $355,000 subcontract held no licence of its own ([5], [11]). Its director held a licence, limited to contracts of no more than $280,000 and to building work of no more than one storey, and the company’s supervisor was registered as a supervisor for the director, not the company ([11]). The case was decided on the basis that no court had found the failure inadvertent ([13]), and Blue J held that the company was not entitled to progress payments under the Security of Payment Act and that the adjudication determination in its favour was void ([51]).
Before a plasterboard business signs a subcontract, it should check:
| Check | What to confirm |
|---|---|
| The licence holder | The entity named in the subcontract is the entity named on the licence |
| Conditions | Any limit on contract value, storeys or the kind of work covers this job (section 7) |
| Supervision | The registered building work supervisor is approved for that entity (section 12) |
| Sole traders | A sole trader who later incorporates needs a licence for the new company before it contracts |
The section 6(2) exception is narrow: the business recovers no fee or other consideration unless a court hearing proceedings for recovery is satisfied that the failure to be licensed resulted from inadvertence only. In Tagara, Blue J said that section 6(2) disentitles an unlicensed contractor from the contract price but does not preclude an action in the nature of quantum meruit ([50]). Section 6(2)(b) gives the inadvertence question to a court hearing proceedings for recovery, so both routes lead to court rather than to an adjudication.
Fixing and setting rates in the subcontract
Plasterboard work is priced by area, by item or by the job, and the dispute after the job is about the measure. The subcontract should fix the measure before the first sheet goes up.
| Term | What it settles |
|---|---|
| The measure | Square metres from the drawings or measured on site, and whether openings are deducted |
| Heights and access | Ceiling heights the rate assumes, and the rate above them |
| Extras | Bulkheads, curved walls, recesses and patching, each at its own rate |
| Supply | Labour only, or supply and fix, and who orders, stores and protects the board |
| The system | The board type and fixing system the drawings or specification name for each area, including wet areas |
| Measure sheets | A measure for each stage, signed by the builder's supervisor, attached to the payment claim |
Where the builder changes the work, the subcontract should require a written direction before the extra work starts and state how the extra is valued. A rate schedule attached to the subcontract gives a valuation for each listed change.
The finish and the trades that follow
The finish the price allows for has to be named in the subcontract, by reference to the specification or to a sample area the builder signs off. A finish for a flat paint under ordinary light is a different job from a finish for a gloss paint under a long window, and the price should say which one it is.
After setting, other trades come back through the walls. The terms should deal with them:
- Damage by others. Holes and cut-outs made after setting by electricians, plumbers or carpenters are not plasterboard defects, and repairing them is a variation.
- Records of repairs. A docket for each repair, naming the area, the damage and the trade that caused it, so the builder can recover the cost from that trade.
- Sign-off. A sign-off for each area before the painter starts, recording that the setting is finished to the agreed standard.
- Back charges. Written notice of any defect and a chance to inspect and fix it before the builder deducts a back charge.
Payment claims and payment schedules
The Security of Payment Act gives a subcontractor a statutory route to progress payments. Fixing and setting plasterboard in a building is construction work under section 5(1)(a).
- The claim. A payment claim must identify the construction work, state the amount claimed and say that it is made under the Act (section 13(2)).
- Timing. A claim can be served within the period the subcontract fixes or within six months after the work was last carried out, whichever is later (section 13(4)). The ceiling fixer guide discusses a claim that failed that test.
- The schedule. A builder that disputes the claim can reply with a payment schedule identifying the claim and stating the amount it proposes to pay and, where that is less, why (section 14(1) to (3)).
- Silence. A builder that gives no schedule within the time in the subcontract, or 15 business days if that is earlier, becomes liable to pay the claimed amount (section 14(4)).
- Pay when paid. A clause that makes payment depend on the builder being paid by the owner has no effect (section 12).
When a builder disputes your claim. Book a same-day free 30-minute consultation or call (08) 7094 2021.
When a company client will not pay
A builder or developer that trades through a company can resist a debt by alleging defects and overcharging. The record of the job decides whether those allegations have substance.
In M & H Leigh Building, the two defendants, trading as Ceilings 2000 Construction, did plasterboard work on a major renovation for a company that owned the land ([1]). They served two statutory demands, and the company applied to set them aside ([2], [3]). The company alleged overcharging, poor workmanship and rectification of earlier mistakes, but its evidence was vague and generalised, and it never put a figure on the reduction or the offsetting claim it said it had ([11], [13]). The company also said that, because the contractors had not given enough detail of repairs they made to damage caused by other subcontractors, it could not recover those costs ([12]). The demands were not set aside; they were varied and declared to have effect ([16], [18]).
The practical lesson is about records. Signed measure sheets, written directions for extra work and a docket for every repair of another trade’s damage leave a company client nothing vague to point to.
Homeowner and renovation jobs
Plasterboard work on a house for its owner is domestic building work. Under $20,000 it is minor domestic building work: the rules on written contracts, deposits and cooling-off do not apply, but the statutory warranties do (sections 27(2), 36(2); regulation 4(4)). At $20,000 or more, the contract must be in writing with all its terms, carry the licensed name and number, be signed and be given to the owner with Form 1 (section 28), and the deposit is limited to 5% (section 30(4)).
The warranties require proper work to accepted trade standards and good and proper materials where the business supplies them (section 32(2)(a), (b)), and a term that excludes them is void (section 42). A licence limited to subcontract work for licensed builders does not cover a job taken directly from a homeowner.
What the plasterboard pack holds
A plasterboard pack is built from our masters and a plasterboard schedule, and quoted as a fixed fee before we start.
- A subcontract with the licence holder, rates, measure, finish standard and back charge notice clauses.
- A measure sheet and a repair docket to attach to each payment claim.
- Payment claim and payment schedule forms that meet sections 13 and 14 of the Security of Payment Act.
- Homeowner terms for jobs under $20,000 and a domestic building work contract with Form 1 for larger jobs.
- A licence and supervisor checklist for each new builder and each change of business structure.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
The crew that incorporated. A plasterboard fixer licensed as a sole trader sets up a company for tax reasons and keeps quoting. The company signs a subcontract on a two storey job. Until the company holds its own licence, section 6(2) takes away its right to the contract price unless a court finds the failure inadvertent, and a payment claim in its name is exposed to the reasoning in Tagara.
The measure argument. A builder disputes a claim for 900 square metres, saying openings should have been deducted. The subcontract states that openings under two square metres are not deducted, and the measure sheet for the stage is signed by the builder’s supervisor.
The holes after setting. An electrician cuts in extra downlights after the ceilings are set. The fixer repairs them, records each repair on a docket naming the trade, and claims them as a variation. The builder recovers the cost from the electrician with the same dockets.
Plasterboard case law
None of the decisions below set out a standard form for plasterboard subcontracts. Each turned on whether a ceilings and linings contractor could get paid.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| Tagara Builders Pty Ltd v AP & L Services Pty Ltd [2015] SASC 30 | Supreme Court | An unlicensed subcontractor company was not entitled to progress payments; the adjudication determination was void; section 6(2) does not preclude a quantum meruit claim | [5], [11], [13], [50] to [52] |
| M & H Leigh Building Pty Ltd v Chary [2005] SASC 3 | Supreme Court | Vague and unquantified complaints by a company client did not set aside plasterboard contractors' statutory demands, which were varied | [1], [11] to [13], [15], [16], [18] |
Case notes
Tagara Builders Pty Ltd v AP & L Services Pty Ltd [2015] SASC 30
AP & L Services agreed to supply and install ceilings and linings for a two storey learning centre for $355,000 ([5]). The company held no building work contractors licence; its sole director held one with conditions limiting contract value to $280,000 and building work to one storey, and the supervisor was registered for the director, not the company ([11]). The case proceeded on the basis that no court had found the failure resulted from inadvertence only ([13]). Blue J held that, because section 6(2) disentitled the company to the contract price or other consideration, it was not entitled to progress payments under the Security of Payment Act; the adjudicator had no jurisdiction and the determination was void ([51]). His Honour said section 6(2) does not preclude an action in the nature of quantum meruit ([50]). The builder obtained orders in the nature of certiorari and prohibition ([52]).
M & H Leigh Building Pty Ltd v Chary [2005] SASC 3
The defendants, trading as Ceilings 2000 Construction, did plasterboard work on a major renovation for the company that owned the land, and served two statutory demands on it ([1], [2]). Judge Lunn, a Master of the Supreme Court, found the company’s evidence of overcharging, workmanship and rectification vague, generalised and not quantified ([11], [13]), and said the onus was on the company to show genuine disputes that would reduce the claims below the statutory minimum ([15]). Overstatements the contractors conceded before the hearing were no basis to set the demands aside, and the demands were varied and declared to have effect ([16], [18]). The decision applied the Corporations Act as it stood in 2005.
How we build plasterboard fixer terms and conditions
We start with how you trade and who you work for: sole trader or company, labour only or supply and fix, builders or homeowners.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on your licence, structure, supervisor, builders and rates | We check that the licence, the supervisor and the contracting entity line up |
| 2. Review | Your quotes, the subcontracts you have signed, measure sheets and claims | We mark the measure, back charge and payment terms that leave you exposed |
| 3. Drafting | Masters and the plasterboard schedule | We draft the subcontract, measure sheets, repair dockets and payment claim forms |
| 4. Delivery | Word documents ready for the next job | We brief you on serving payment claims and answering payment schedules |
We cannot promise that terms prevent every dispute. A subcontract in the right name, with a measure both sides signed, takes the strongest arguments away from a builder that does not want to pay.
Before you sign the next builder’s subcontract. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Is a plasterboard subcontract template enough in SA?
Not on its own. A template that is not written for South Australian plasterboard work will not check that the contracting entity holds the licence, and it can leave out the payment claim and schedule steps of the Security of Payment Act. A builder’s own subcontract can also carry terms the Act makes ineffective, such as pay when paid (section 12).
Does the company or the director need the builders licence?
The entity that carries on the business and signs the subcontract. In Tagara, the director’s licence did not authorise the company’s work, and the company was not entitled to progress payments.
What happens to a payment claim if the plasterboard company is unlicensed?
In Tagara, decided on the basis that no court had found the failure inadvertent, the Supreme Court held that an unlicensed company had no entitlement to progress payments, so the adjudication determination in its favour was void ([51]).
Can an unlicensed plasterboard company recover anything?
Possibly. A court can allow recovery if satisfied the failure to be licensed resulted from inadvertence only (Building Work Contractors Act section 6(2)(b)), and in Tagara, Blue J said section 6(2) does not preclude an action in the nature of quantum meruit.
How are plasterboard rates measured?
The subcontract decides: square metres from the drawings or on site, whether openings are deducted, and separate rates for bulkheads, curves and patching. A measure sheet signed for each stage avoids the argument.
What must a payment claim for plasterboard work say?
It must identify the work, state the amount claimed and state that it is made under the Security of Payment Act (section 13(2)).
What if the builder does not answer a payment claim?
A builder that gives no payment schedule within the time in the subcontract, or 15 business days if that is earlier, becomes liable to pay the claimed amount on the due date (Security of Payment Act section 14(4)).
Can a builder engage an unlicensed plasterboard fixer?
No. A licensed building work contractor must not contract with an unlicensed person to carry out building work on its behalf (Building Work Contractors Act section 47A).
Is a pay when paid clause in a plasterboard subcontract valid?
No. A term that makes payment depend on the builder being paid by someone else has no effect (Security of Payment Act section 12).
Do I need a lawyer for plasterboard fixer terms and conditions?
The law does not require one, but the licence holder, the subcontract and the payment claim rules have to line up, and one mismatch can cost the claim. We draft plasterboard fixer terms and conditions for South Australian plasterboard businesses that get paid for the area they fix.
Related trade contract guides
Related guides
- Finishing trades contracts SA
- Plasterer terms and conditions SA
- Ceiling fixer terms and conditions SA
- Carpenter terms and conditions SA
- Shopfitter terms and conditions SA
- Commercial builder terms and conditions SA
- Builders licence SA
- Building deposits and progress payments
- Variations to a building contract
- Subcontractor agreements
- Trade contracts SA