Plumbing and Electrical Contracts SA: Plumbers, Gasfitters, Electricians and Solar Installers
Plumbing, gas and electrical contracts in South Australia
Plumbing, gas fitting and electrical businesses in South Australia work under their own licensing Act and, on homeowner jobs, under the building contract rules as well. The Plumbers, Gas Fitters and Electricians Act 1995 (SA) decides who may contract for the work and who may do it. The Building Work Contractors Act 1995 (SA) decides what a contract with a homeowner must contain once the job reaches $20,000. The Security of Payment Act decides how a subcontractor is paid by a builder. Talon Legal drafts contracts, terms and conditions and subcontracts for plumbers, gasfitters, electricians and solar installers. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Plumbing and electrical contracts SA key facts
| Issue | Position in South Australia |
|---|---|
| Governing law | Plumbers, Gas Fitters and Electricians Act 1995 (SA) (the PGE Act) and its Regulations 2025 for licences; Building Work Contractors Act 1995 (SA) and Regulations 2026 for homeowner contracts; Security of Payment Act 2009 (SA) for subcontracts. Current to 20 November 2026. |
| Contractor licence | Carrying on business as a plumbing, gas fitting or electrical contractor, or advertising or holding out as entitled to, needs a contractor licence under the PGE Act (section 6(1)). |
| Worker registration | The person who does the work personally must be registered for it (section 13). A licensed contractor whose work is not done personally by an authorised registered worker commits an offence (section 12). |
| Builders licence | Not needed for building work that the PGE licence authorises (Building Work Contractors Regulations 2026 regulation 5(1), (2)). An unrestricted plumbing contractor may also do minor roof plumbing under $3,000 (regulation 5(2)(b), (13)). |
| Builders who take on PGE work | A builder needs no PGE contractor licence if the plumbing, gas fitting or electrical work is done by people licensed or registered for it (PGE Regulations 2025 regulation 4(1)). |
| Homeowner jobs | Plumbing, gas fitting and electrical work on a house is domestic building work, and so are air-conditioning and solar panel installation (regulation 4(1)(f) to (h), 4(2)(e) to (g) of the 2026 Regulations). |
| Jobs of $20,000 or more | A domestic building work contract signed by both parties and given with Form 1, a deposit of not more than 5%, and progress payments only for work done (sections 28 and 30). Below $20,000 (contracts from 10 November 2025) the job is minor domestic building work. |
| Charging clauses | A contract for PGE work on domestic property that contains a charging clause must be in writing, signed by both parties and given with the prescribed notice, whatever its value (PGE Act section 33B; PGE Regulations regulation 13). |
| Advertising | A licensed contractor's advertisement must state the licence number (PGE Act section 33A). |
| Unlicensed work | No fee or other consideration for work performed as a contractor unless licensed, or unless a court finds the failure resulted from inadvertence only (PGE Act section 6(2)). |
| Compliance | Electrical, gas fitting and plumbing work must meet the requirements for examinations, tests and certificates of compliance under the Electricity Act 1996, the Gas Act 1997 and the Water Industry Act 2012. |
| Subcontracts | The Security of Payment Act applies to construction contracts, written or oral (section 7(1)), and a pay when paid clause has no effect (section 12). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need plumbing and electrical contracts? What this guide covers
This guide sets out the law that plumbing and electrical contracts in South Australia have to work within, current to 20 November 2026. It covers what plumbers, gasfitters, electricians, solar installers and the related services trades share: PGE licences and registration, when a builders licence is needed as well, homeowner jobs either side of $20,000, charging clauses, certificates of compliance and getting paid on subcontracts. The trade guides then deal with what is particular to each trade: electrician terms and conditions, plumber terms and conditions for plumbers and gasfitters, and solar installer terms and conditions.
This family sits under our trade contracts SA guide, which maps the Building Work Contractors Act for every trade, and next to the builders licence guide.
Free Consultation. Send us the quote form or terms you use now and we will tell you what the law requires of them. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Which laws govern plumbing, gas and electrical contracts?
- Who needs a PGE licence or registration?
- When does a PGE trade need a builders licence too?
- Homeowner jobs either side of $20,000
- Charging clauses in plumbing and electrical contracts
- Certificates of compliance and the Technical Regulator
- Work for builders and commercial clients
- Trades in this family
- How similar matters tend to play out
- What the pack adds for these trades
- Plumbing and electrical case law
- Frequently asked questions
- Related guides
Which laws govern plumbing, gas and electrical contracts?
Two licensing schemes and several sets of contract rules can apply to one job. The PGE Act decides who can take the job; the Building Work Contractors Act decides how a homeowner contract is written; the technical Acts decide what has to be certified at the end.
| Law | What it decides for a plumbing, gas or electrical business | Key provisions |
|---|---|---|
| Plumbers, Gas Fitters and Electricians Act 1995 (SA) | Contractor licences, worker registration, business names, licence numbers in advertisements, charging clauses in domestic contracts | Sections 3, 6, 7, 12 to 14, 33, 33A, 33B |
| Plumbers, Gas Fitters and Electricians Regulations 2025 | Work exempt from the Act, the builders' exemption from the contractor licence, the charging clause statements and notice | Regulations 4, 13 and Schedule 1 |
| Building Work Contractors Act 1995 (SA) | Homeowner contracts for domestic building work: formalities, price, deposits, warranties and cooling-off | Part 5 (sections 27 to 42) |
| Building Work Contractors Regulations 2026 | PGE work as prescribed building work, the $20,000 sum, and the builders licence exemption for PGE contractors | Regulations 4, 5 |
| Building and Construction Industry Security of Payment Act 2009 (SA) | Progress payments, payment claims and payment schedules on subcontracts and commercial jobs | Sections 7, 8, 11 to 14 |
| Electricity Act 1996 (SA) | Electrical work, examinations and tests to the regulations; notification and certificates of compliance | Section 61 |
| Gas Act 1997 (SA) | Gas fitting work to the regulations; certificates of compliance; directions to rectify | Sections 56, 57 |
| Water Industry Act 2012 (SA) | Plumbing standards published by the Technical Regulator; certificates of compliance | Sections 67, 69 |
| Australian Consumer Law (Competition and Consumer Act 2010 (Cth), Schedule 2) | Consumer guarantees for services, unfair contract terms, door-to-door and telephone sales | Sections 23 to 27, 60 to 64A, 69, 82, 86 |
The licence and the contract rules apply together. An electrician who rewires a house for $28,000 needs the PGE contractor licence to take the job and a section 28 contract to document it, and the work still has to be tested and certified under the Electricity Act.
Who needs a PGE licence or registration?
The PGE Act separates the business from the person holding the tools. The business needs a contractor licence; the person who does the work needs registration.
| Requirement | Who it applies to | Provision |
|---|---|---|
| Contractor licence | A person who carries on business as a plumbing, gas fitting or electrical contractor, or advertises or holds out as entitled to | Section 6(1) |
| Restricted contractor licence | Plumbing limited to water plumbing, sanitary plumbing, draining work or otherwise; gas fitting or electrical work limited in any way | Section 7 |
| Worker registration | A person who does plumbing, gas fitting or electrical work personally, or holds out as entitled or competent to | Sections 13, 14 |
| Registered worker on every job | A licensed contractor must have the work done personally by a registered worker authorised for it | Section 12 |
| Business name | Business is carried on only in the licensed name or a registered business name notified to the Commissioner | Section 33 |
| Licence number in advertising | A licensed contractor's advertisement must state the licence number (job advertisements and advertisements to other contractors excepted) | Section 33A |
An electrical contractor is a person who carries on the business of performing electrical work for others, and “perform” includes causing, organising or arranging the work (section 3). A business that sells a job and arranges registered workers to do it still needs the contractor licence. That is how a solar company with licensed electricians on every installation came to be convicted of carrying on business as an electrical contractor without a licence (see the case law below).
The penalties under section 6(1) are a fine of up to $100,000 for a first or second offence by an individual and up to $150,000 or 12 months imprisonment, or both, for a later one; for a company, $500,000 and $550,000. The expiation fee is $5,000. Section 12 carries a fine of up to $50,000, and the advertising offence in section 33A up to $25,000.
The licence is also a condition of payment. A person required to hold a contractor licence is not entitled to any fee or other consideration for work performed as a contractor (section 6(2)). The exceptions are holding the licence, or a court being satisfied that the failure to be licensed resulted from inadvertence only.
When does a PGE trade need a builders licence too?
Plumbing, gas fitting and electrical work is building work, because the 2026 Regulations prescribe it (regulation 4(1)(h)). The same Regulations exempt PGE contractors from the building work contractors licence, but only within limits.
- Gas fitting and electrical contractors are exempt on condition that the building work they perform is limited to work their PGE licence authorises (regulation 5(1)).
- Plumbing contractors are exempt on the same condition, and a plumbing contractor whose licence has no conditions limiting its work may also do minor roof plumbing work, such as guttering, downpipes, flashings and roof coverings, costing less than $3,000 (regulation 5(2), (13)).
Work outside those limits needs a building work contractors licence. A plumber who relines a shower and then retiles the wall, or an electrician who frames and lines a wall to take a new switchboard, is doing building work the PGE licence does not authorise. Our builders licence guide covers the licence classes and conditions.
The exemption runs the other way for builders. Regulation 4(1) of the PGE Regulations 2025 covers builders, building contractors and architects, and other businesses whose principal purpose is construction, installation, alteration, repair or maintenance of buildings, structures, plant or equipment. They need no PGE contractor licence, on condition that the plumbing, gas fitting or electrical work is done in the ordinary course of the business by a person licensed or registered for it. That is what lets a bathroom renovator quote for a bathroom that includes plumbing.
Solar installation sits across both licences. Consumer and Business Services treats installation without structural building work as within an electrical contractor’s licence or a building work contractor’s licence, and structural work as needing a building work contractor’s licence; the solar installer guide sets out that guidance.
Homeowner jobs either side of $20,000
Plumbing, gas fitting and electrical work in relation to a house is domestic building work, as is installing air-conditioning or solar panels (regulation 4(2)(e) to (g)). Part 5 of the Building Work Contractors Act therefore governs a PGE trade’s contract with a homeowner exactly as it governs a builder’s.
| Homeowner job | What applies | What the paperwork must do |
|---|---|---|
| Under $20,000, contract made on or after 10 November 2025 | Minor domestic building work: Division 1 (sections 28 to 31), insurance and cooling-off do not apply (sections 27(2), 33(2), 36(2)). The statutory warranties do (section 32). | A signed quote with terms is enough for the Act, unless the terms include a charging clause (section 33B of the PGE Act). |
| $20,000 or more | Written contract with all its terms, the licence details and both signatures, given with Form 1 (section 28); price rules (section 29); a deposit of not more than 5% and progress payments only for work done (section 30); cooling-off of five clear business days (section 36) | A full domestic building work contract, served with Form 1 |
| Work requiring development approval at $20,000 or more | Building indemnity insurance before work starts (sections 33, 34) | Insurance certificate given to the owner |
| Owner who does not live in the house | Part 5 as above, and the Security of Payment Act can also apply (section 7(2)(b) of that Act) | Payment terms that work under both Acts |
| Sold at the door or by phone without an invitation | An unsolicited consumer agreement: ten business days to terminate, and no supply or payment in that time (Australian Consumer Law sections 69, 82, 86) | Agreement documents and procedures built for that sale |
“Cost to the building owner” decides the $20,000 line (section 3). Because a domestic building work contract includes any variation of it, a variation can take a job that started below $20,000 into Division 1. That is a reading of sections 3 and 28; no South Australian decision on the point was located. The variations guide and the minor domestic building work guide set out how to price and document both sides of the line.
Charging clauses in plumbing and electrical contracts
A charging clause gives the contractor an interest in the owner’s property, with a right to lodge a caveat over it. The PGE Act regulates it separately from the Building Work Contractors Act, and its rule has no $20,000 threshold.
Section 33B covers a contract to perform plumbing, gas fitting or electrical work on domestic property that contains a charging clause. The contract must be in writing and set out all its terms in full. It must state the business name, the licence number and any partners’ names and licence numbers, and comply with the regulations. It must be signed by the contractor and the property owner, and the owner must be given a copy with a notice in the prescribed form. The maximum penalty is $25,000 and the expiation fee $3,000. Domestic property means a house or other building intended for occupation as a place of residence, other than prescribed classes.
The PGE Regulations 2025 require the contract to include four statements (regulation 13(1)):
- that the clause seeks to establish an interest in the property over which a caveat can be lodged;
- that a caveat will restrict the owner’s dealings with the property;
- that the interest entitles the contractor to apply to a court for sale of the property to recover a debt;
- that the owner is advised to get independent legal advice.
The prescribed notice is Form 1 in Schedule 1 of those Regulations (regulation 13(2)). On a job of $20,000 or more the Building Work Contractors Regulations require the same four statements in the domestic building work contract (regulation 16).
Terms printed on the back of a quote or linked from an invoice do not meet section 33B if they contain a charging clause: the contract must be signed by both the contractor and the owner, and the notice must be given. A charging clause is optional. Terms that leave it out avoid this requirement altogether.
Certificates of compliance and the Technical Regulator
Each PGE trade has its own technical Act, and each puts obligations on the contractor that a contract should reflect.
| Work | Obligation | Provision |
|---|---|---|
| Electrical work | Where a licensed electrical contractor engages a registered electrical worker, the contractor must make sure the work, and the examinations and tests of it, are carried out as the regulations require, and that the requirements for notification and certificates of compliance are met. Maximum fine $50,000 for a company, $10,000 otherwise; expiation fee $315. | Electricity Act 1996 section 61 |
| Gas fitting work | A licensed gas fitting contractor engaged for the work must make sure the work, examinations and tests meet the regulations, and the notification and certificate of compliance requirements apply where a registered gas fitting worker does the work | Gas Act 1997 section 56 |
| Unsafe or non-compliant gas installations | The Technical Regulator may direct rectification, including by the person who did the work within the two years before the direction | Gas Act section 57 |
| Plumbing | Work in connection with plumbing, and its examinations and tests, must meet the standards the Technical Regulator publishes; certificates of compliance are issued under a scheme the Technical Regulator establishes or approves | Water Industry Act 2012 sections 67, 69 |
The regulations and standards under each Act fix the timing and form of the certificates, and this guide does not set them out. A contract can still deal with the commercial side. It can name the certificate as part of the work and say when it will be issued. It can also say what happens when an existing installation cannot be certified without further work the owner has not agreed to pay for.
Work for builders and commercial clients
A subcontract with a builder is not a domestic building work contract (section 3 of the Building Work Contractors Act), so the homeowner rules do not govern it. The Security of Payment Act does.
- Progress payments. A right to a progress payment arises on and from each reference date (section 8). Unless the contract fixes a due date, payment is due 15 business days after a payment claim (section 11(1)).
- Payment claims. A claim must identify the work, state the amount claimed and state that it is made under the Act (section 13(2)).
- Payment schedules. A builder who does not answer a claim with a payment schedule within the contract time, or 15 business days if that is earlier, becomes liable for the full claimed amount (section 14(4)).
- No pay when paid. A clause that makes payment depend on the builder being paid has no effect (section 12), and the Act cannot be contracted out of (section 33).
Builders engaging PGE trades must still check licences. A licensed builder must not contract with an unlicensed person to do building work on its behalf (section 47A(1)). That rule does not apply where the subcontractor is exempt from holding a licence for the work (section 47A(2)(a)). Read with regulation 5, that exception is what allows a builder to engage a PGE-licensed trade for PGE work.
Commercial terms have their own limits. Terms used across many jobs are likely to be standard form contracts (section 27), and an unfair term in a standard form contract with a consumer or a small business is void (Australian Consumer Law section 23). Services bought for $100,000 or less are acquired as a consumer (section 3(3)(a) and regulation 77A of the Competition and Consumer Regulations 2010), which brings in the guarantee of due care and skill (section 60). For services not of a household kind, liability may be limited to supplying the services again or paying the cost of that (section 64A(2)), unless relying on the limit is not fair or reasonable (section 64A(3)). The terms of trade guide and the subcontractor agreements guide go further.
Trades in this family
The licence position below states where the Acts put each trade. Individual businesses can differ, depending on the licence they hold and the work they take on.
| Trade | Typical work | Licence position | Guide |
|---|---|---|---|
| Electrician | Wiring, switchboards, lighting, appliances, repairs and maintenance | PGE electrical contractor licence; registered electrical worker for the work | Electrician terms and conditions |
| Plumber and gasfitter | Water and sanitary plumbing, draining, hot water, gas lines and appliances | PGE plumbing or gas fitting contractor licence, which may be restricted (section 7) | Plumber terms and conditions |
| Solar and battery installer | Rooftop solar systems, inverters and batteries | PGE electrical licence for the electrical work; a building work contractors licence where the work goes beyond it | Solar installer terms and conditions |
| Drainer | Sanitary drains, stormwater, drain repairs | Draining work is plumbing (section 3); a plumbing licence can be restricted to it (section 7) | Covered by the plumber guide |
| Backflow prevention installer and tester | Testable backflow prevention devices | Installing or testing backflow prevention devices is plumbing (section 3) | Covered by the plumber guide |
| Air-conditioning installer | Split and ducted systems | Installing air-conditioning is prescribed building work (regulation 4(1)(f)); the electrical connection is PGE work. The licences needed depend on the work the business does. | This guide |
| EV charger installer | Home and commercial chargers | Electrical work under the PGE Act | Covered by the electrician guide |
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
A gas hot water replacement for $3,800, with a charging clause in the terms. The contract is made after 10 November 2025 and costs the owner less than $20,000, so it is minor domestic building work and section 28 does not apply. Section 33B of the PGE Act still does, because the terms contain a charging clause and the house is domestic property. Unless the contract is signed by both parties and the owner is given the prescribed notice, the contractor is exposed to an offence on a small job.
An electrical contractor wiring twelve townhouses for a builder. The contract with the builder is a subcontract, so Part 5 of the Building Work Contractors Act does not govern it. The Security of Payment Act does: payment claims made under the Act, a payment schedule within the contract time or 15 business days, and no pay when paid. The builder gives the statutory warranties to the owners; the electrician answers to the builder under the subcontract.
A landlord’s $26,000 switchboard upgrade and rewire. The work is on a house, so it is domestic building work. At $26,000 Division 1 applies: a written contract with Form 1, a deposit of not more than $1,300, and progress payments only for work done. Because the owner does not live there, the Security of Payment Act can also apply, which changes how progress payments are claimed.
What the pack adds for these trades
Every trade pack starts from our South Australian masters. For plumbing, gas and electrical businesses we build in what this family needs.
- Your PGE licence number and licensed business name in every contract, quote and invoice template, with a note on section 33A for advertising.
- A certificate of compliance clause. It names the certificate as part of the work and deals with existing installations that cannot be certified.
- Call-out, after-hours and make-safe terms for maintenance and emergency work, kept apart from the homeowner contract.
- The PGE charging clause notice and the four statements if you want a charging clause, or payment security without one.
- A trade schedule with scope, exclusions and warranty wording for your trade.
The pack is quoted as a fixed fee before we start.
Plumbing and electrical case law
The Supreme Court decision below concerns the PGE contractor licence and the door-to-door sale of solar systems. The Building Work Contractors Act decisions that apply to PGE trades on homeowner jobs are in the trade contracts SA guide.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| Green Engineering (Vic) Pty Ltd v Deputy Commissioner for Consumer Affairs [2016] SASC 162 | Supreme Court | A company that contracts to supply and install solar systems carries on business as an electrical contractor, even where a licensed electrician does the electrical work | [12] |
Case notes
Green Engineering (Vic) Pty Ltd v Deputy Commissioner for Consumer Affairs [2016] SASC 162
A Victorian company registered as an electrical contractor in Victoria sold and installed solar systems in South Australia without a South Australian contractor licence, arranging licensed electricians to do the electrical work ([4], [5]). It pleaded guilty to carrying on business as an electrical contractor without a licence. Doyle J explained that the company’s dealings breached section 6 because, by entering into contracts to supply and install the systems, it organised or arranged the performance of regulated work, even though a licensed electrician did that work ([12]). It also pleaded guilty to unsolicited consumer agreement offences: its sales representatives used contract pads giving a five day cooling-off period, not the ten days that applied ([13]). Doyle J allowed the appeal, set aside the overall fine of $105,000 and imposed fines totalling $44,800, including $17,500 for the licence offence after a 30% reduction for the guilty plea ([36], [43]).
Frequently asked questions
Do plumbers, gasfitters and electricians need a builders licence in SA?
Not for building work their PGE licence authorises. Regulation 5(1) and (2) of the Building Work Contractors Regulations 2026 exempt PGE gas fitting, electrical and plumbing contractors on that condition. Work beyond the PGE licence, such as carpentry or tiling around the installation, needs a building work contractors licence.
What is the difference between a PGE licence and PGE registration?
The contractor licence is for the business that carries on plumbing, gas fitting or electrical contracting (section 6 of the PGE Act). Registration is for the individual who does the work personally (section 13). A licensed contractor commits an offence if the work is not done personally by a registered worker authorised for it (section 12).
Is plumbing or electrical work on a house domestic building work?
Yes. Plumbing, gas fitting and electrical work is prescribed building work, and in relation to a house it is domestic building work (regulation 4(1)(h) and 4(2)(g) of the 2026 Regulations). Part 5 of the Building Work Contractors Act therefore applies to the contract with the homeowner.
When does a plumbing or electrical job need Form 1?
When the job is domestic building work and the cost to the owner is $20,000 or more, for contracts made on or after 10 November 2025. Section 28 then requires a written contract signed by both parties, with a copy given to the owner together with Form 1. Jobs under $20,000 are minor domestic building work and need no Form 1.
What does a charging clause require in a plumbing or electrical contract?
On domestic property, a written contract with all its terms, the licence details, both signatures and the four statements in regulation 13 of the PGE Regulations 2025, and a copy given to the owner with the prescribed notice (section 33B of the PGE Act). The requirement applies whatever the value of the job.
Do plumbing and electrical advertisements need a licence number?
Yes. Section 33A of the PGE Act requires a licensed contractor’s advertisement to specify the licence number, with exceptions for job advertisements and advertisements directed to other contractors. The maximum penalty is $25,000 and the expiation fee $3,000.
Can a builder contract for plumbing and electrical work?
Yes. A builder, building contractor or other business whose principal purpose is construction or installation work needs no PGE contractor licence if the PGE work is done in the ordinary course of the business by people licensed or registered for it (regulation 4(1) of the PGE Regulations 2025).
Can an unlicensed plumbing or electrical contractor be paid?
Not as of right. A person who needed a PGE contractor licence and did not hold one is not entitled to any fee or other consideration for work performed as a contractor, unless a court is satisfied the failure resulted from inadvertence only (section 6(2) of the PGE Act).
Who is responsible for certificates of compliance?
For electrical work, a licensed contractor that engages a registered electrical worker must make sure the regulations’ requirements for notification and certificates of compliance are met (section 61 of the Electricity Act 1996). The Gas Act 1997 (section 56) and the Water Industry Act 2012 (sections 67 and 69) set the equivalent rules for gas fitting and plumbing.
Does the Security of Payment Act apply to plumbing and electrical subcontracts?
Yes. It applies to construction contracts, written or oral (section 7(1)), and installing water, drainage, power, lighting, heating and air-conditioning systems is construction work (section 5(1)). It does not apply to domestic building work on the part of premises the owner lives in or proposes to live in (section 7(2)(b)).
Do I need a lawyer for plumbing and electrical contracts?
The law does not require one. Most templates online are written for another state or for no state at all, and miss the PGE rules on charging clauses and licence numbers. We draft contracts for South Australian plumbing, gas and electrical businesses that deal with both licensing Acts, the $20,000 line and getting paid by builders.
Related guides
Related guides
- Electrician terms and conditions SA
- Plumber terms and conditions SA
- Solar installer terms and conditions SA
- Trade contracts SA
- Domestic building work contracts
- Minor domestic building work under $20,000
- Building deposits and progress payments
- Variations to a building contract
- Statutory warranties and defects
- Builders licence SA
- Subcontractor agreements
- Terms of trade and retention of title