Appliance Installer Terms and Conditions SA: Contracts for Installing Appliances
Appliance installer terms and conditions in South Australia
Installing an appliance can be as simple as sliding it into place and plugging it in. It can also mean a new circuit, a fixed gas connection, a water line and a waste connection, each a licensed trade. Talon Legal drafts appliance installer terms and conditions, retailer installation terms and delivery and removal terms for South Australian appliance installers, retailers and kitchen and laundry businesses. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Appliance installer terms and conditions SA key facts
| Issue | Position for appliance installers in South Australia |
|---|---|
| Governing law | Plumbers, Gas Fitters and Electricians Act 1995 (SA); Plumbers, Gas Fitters and Electricians Regulations 2025 (SA); Gas Act 1997 (SA); Australian Consumer Law. Current to 21 November 2026. |
| Plug-in appliances | Work on equipment connected to and beyond an outlet socket at which fixed wiring terminates is exempt electrical work (PGE Regulations regulation 4(5)(c)(iii)). |
| Hard-wired appliances | Connecting an oven, cooktop or other appliance to fixed wiring is electrical work, needing a licensed contractor and registered worker (PGE Act sections 3, 6(1), 13). |
| Gas appliances | Installing or connecting equipment to use gas downstream of the meter or cylinder is gas fitting (section 3); connecting a gas cylinder and portable equipment is exempt (regulation 4(5)(b)(i)). |
| Retailer installs | "Perform" includes causing, organising or arranging the work (section 3), so a business that sells installation is performing it. |
| The appliance | Goods supplied to a consumer must be reasonably fit for any disclosed purpose (Australian Consumer Law section 55). |
| First step | Same-day free 30-minute consultation. Call (08) 7094 2021. |
Need appliance installer terms and conditions? What this guide covers
This guide covers what is particular to appliance installer terms and conditions in South Australia, current to 21 November 2026: which installations are licensed, gas appliances, water and waste connections, retailers that sell installation, measuring and fitting, the old appliance, and getting paid. The law all plumbing, gas and electrical trades share is in the plumbing and electrical contracts SA guide.
We act for appliance installation businesses, appliance retailers that offer installation, and kitchen and laundry fit-out businesses.
Free Consultation. Send us your installation terms, your retailer agreement or your delivery and removal wording. Book a same-day free 30-minute consultation or call (08) 7094 2021.
On this page
- Which installations are licensed
- Gas appliances
- Water and waste connections
- Retailers that sell installation
- Measuring, fitting and commissioning
- The old appliance and the delivery
- Getting paid for installation work
- What the appliance pack holds
- How similar matters tend to play out
- Appliance installation case law
- How we build appliance installer terms and conditions
- Frequently asked questions
- Related trade contract guides
Which installations are licensed
| Appliance | Connection | Status |
|---|---|---|
| Fridge, freezer, microwave, plug-in oven | Plugged into an existing outlet | Exempt electrical work (PGE Regulations regulation 4(5)(c)(iii)) |
| Wall oven or cooktop on its own circuit | Fixed wiring | Electrical work (PGE Act section 3) |
| New outlet or circuit for any appliance | Fixed wiring | Electrical work (section 3) |
| Gas cooktop, oven, heater or dryer | Fixed gas connection downstream of the meter | Gas fitting (section 3) |
| Barbecue or patio heater on a cylinder | Cylinder and portable equipment | Exempt gas fitting (regulation 4(5)(b)(i)) |
| Dishwasher or fridge plumbed into the house pipes | Water and waste connections | Water plumbing and sanitary plumbing, on a reading of section 3 |
The exemption for plug-in equipment does not extend to altering, repairing or maintaining an electrical connection rated above low voltage (regulation 4(5)(c)(iii)). A business carrying on electrical, gas fitting or plumbing work for others needs the contractor licence (PGE Act section 6(1)), and each worker needs registration for the work done personally (section 13).
Gas appliances
| Step | What the terms deal with |
|---|---|
| Who connects | A licensed gas fitting contractor using a registered gas fitting worker |
| The appliance's requirements | Clearances, ventilation and flue requirements in the manufacturer's instructions |
| Testing and certificate | Where a registered gas fitting worker does the work, the regulations' requirements on notification and certificates of compliance must be complied with (Gas Act section 56(2)) |
| Rectification | The Technical Regulator can direct rectification of an unsafe or non-compliant installation, including by the person who did the work within the previous two years (section 57) |
| Conversions | Converting an appliance between natural gas and LPG is part of the gas work, priced and certified with it |
Water and waste connections
- Water lines. Water plumbing covers pipes and equipment connected directly or indirectly to a public water supply system, and “equipment” includes appliances (PGE Act section 3). On a reading of those definitions, plumbing a dishwasher or fridge water line into the house pipes is water plumbing.
- Waste. Pipes that receive and convey wastewater to sanitary drains are sanitary plumbing work (section 3), which on a reading of the definition includes connecting a dishwasher waste into the sink plumbing.
- Tapware. Replacing, altering, repairing or disconnecting domestic tapware is exempt (PGE Regulations regulation 4(5)(a)(iii)).
- Hose connections. Where an appliance connects by its own hose to an outlet already provided, the terms should say the installer connects to that outlet and does not alter the plumbing.
Retailers that sell installation
A retailer that sells “delivered and installed” causes, organises or arranges the installation, and so performs it (PGE Act section 3). In Green Engineering, below, a seller of installed solar systems that used licensed electricians still pleaded guilty to carrying on business as an electrical contractor without a licence.
A business that carries on another business whose principal purpose is the construction, installation, alteration, repair or maintenance of a building, structure, plant or equipment is exempt from the contractor licence, on condition that the regulated work is done by a person licensed or registered for it (PGE Regulations regulation 4(1)(b)). On a reading of that regulation, it can apply to a business whose principal purpose is installing appliances, but not to one whose principal purpose is selling them.
An unlicensed contractor is not entitled to any fee or other consideration for the work unless a court is satisfied the failure resulted from inadvertence only (PGE Act section 6(2)). A retailer’s installation terms should name the licensed contractor, or set out the exemption it relies on.
Measuring, fitting and commissioning
| Fitting term | What it fixes |
|---|---|
| Measurements | Who measures the space and cut-out, and that the order relies on those measurements |
| Cabinetry | Who modifies cabinetry and benchtops, and that structural changes are excluded |
| Services in place | The outlet, circuit, gas point, water and waste points the client must have ready |
| Clearances | The manufacturer's clearance and ventilation requirements, and that the installer may refuse an unsafe location |
| Commissioning | Testing, a demonstration, and the manual and warranty card left with the client |
Where a consumer tells the seller what the appliance is for, it must be reasonably fit for that purpose (Australian Consumer Law section 55). The installation services must be rendered with due care and skill (section 60), and the guarantees cannot be excluded (section 64(1)).
The old appliance and the delivery
- Disconnection. Disconnecting a fixed gas appliance is gas fitting, which includes disconnection (PGE Act section 3). On a reading of the electrical work definition, disconnecting a hard-wired appliance alters the electrical installation and is electrical work.
- Removal and disposal. Whether the old appliance is taken away, the charge, and any trade-in value.
- Delivery damage. Inspection on delivery, and how damage to floors, walls and doorways is reported.
- Access. Stairs, lifts, narrow doors and parking, and the charge if the appliance cannot be brought in.
Getting paid for installation work
- Domestic jobs. Electrical, gas and plumbing work at a house is prescribed building work (Building Work Contractors Regulations regulation 4(1)(h)). A domestic job under $20,000 is minor domestic building work, and Division 1 of Part 5 does not apply (section 27(2)).
- Charging clauses. A domestic plumbing, gas fitting or electrical contract with a charging clause must be in writing, signed and come with the prescribed notice (PGE Act section 33B).
- Who the client is. For commercial work, the terms should name the company that is the client and have someone with authority sign for it. In Christopoulos, below, a judgment against a director personally was set aside and entered against his company instead.
- Stopped jobs. What is payable if the client stops the job before it is finished: the work done, materials ordered and the return of anything not installed.
What the appliance pack holds
An appliance pack is built from our masters and an appliance installation schedule, and quoted as a fixed fee before we start.
- Installation terms that separate plug-in, electrical, gas and plumbing work.
- Retailer installation terms that name the licensed contractor or the exemption relied on.
- Measuring, cabinetry and services-ready clauses.
- Delivery, removal and disposal terms.
- Commercial kitchen and laundry terms with stopped-job payment clauses.
How similar matters tend to play out
These are illustrations built from the rules above, not predictions. Every job turns on its own contract and facts.
The cooktop that needed a new circuit. A delivery crew finds the new induction cooktop needs a larger circuit. The terms said fixed wiring was done only by the licensed electrician on a separate quote, and the crew left the cooktop in its box.
The gas oven and the wrong gas. A natural gas oven is delivered to a house on LPG. The installation terms put conversion with the gas fitter and priced it, and the certificate covered the converted appliance.
The laundromat that stopped. A business client stops a fit-out halfway when its lease falls through. The terms named the company as client and set out what was payable for work done, so the claim went against the right party.
Appliance installation case law
None of the decisions below concerned an appliance installer’s terms. Each decides a rule an installation business runs into.
| Case | Court | Principle | Pinpoint |
|---|---|---|---|
| Christopoulos v BN and R Roberts Pty Ltd [2019] SADC 97 | District Court | A gas and plumbing business stopped mid-job was paid for the work done, by the client company rather than its director | [6], [7], [27] to [30] |
| Green Engineering (Vic) Pty Ltd v Deputy Commissioner for Consumer Affairs [2016] SASC 162 | Supreme Court | Contracting to supply and install systems was organising or arranging the regulated work, although licensed electricians did it | [4], [5], [12], [43] |
Case notes
Christopoulos v BN and R Roberts Pty Ltd [2019] SADC 97
A gas and plumbing business quoted to run a gas line from the meter, connect four stack dryers and a water heater, and run water lines and flues for a new laundromat ([7]). Before the work was finished, the client told it to stop because the landlord would not do further work, and an amended invoice for the work done was not paid ([6]). On review, Judge Durrant joined the client’s company ([27]) and found the invoice was payable for the listed work done ([28]). The summary judgment against the director personally was set aside and judgment was entered against the company ([29], [30]).
Green Engineering (Vic) Pty Ltd v Deputy Commissioner for Consumer Affairs [2016] SASC 162
A Victorian company sold and installed solar systems in South Australia without a South Australian contractor licence, using licensed electricians for the electrical work ([4], [5]). Doyle J explained why contracting to supply and install was organising or arranging the regulated work ([12]). The fines were reduced on appeal to a total of $44,800 ([43]). The definition of perform was then in section 4 of the Act and is now in section 3, in materially the same words on organising or arranging.
How we build appliance installer terms and conditions
We start with what your crews actually connect, and where a licensed trade takes over.
| Stage | What happens | What we do |
|---|---|---|
| 1. Intake | A questionnaire on your licences or exemption, your appliance range, your crews and your retail partners | We sort your jobs into plug-in, electrical, gas and plumbed installations |
| 2. Review | Your installation terms, retailer agreements, job sheets and removal terms | We mark licence gaps, measurement promises and payment terms that need fixing |
| 3. Drafting | Masters and the appliance installation schedule | We draft your installation terms, retailer terms and job sheet wording |
| 4. Delivery | Word documents and a job sheet checklist | We brief your crews on what they connect and what they leave for a licensed trade |
We cannot promise that terms prevent every dispute. Terms that match what each crew is allowed to connect decide most of them before they start.
Before your next installation booking goes out. Book a same-day free 30-minute consultation or call (08) 7094 2021.
Frequently asked questions
Can an appliance installer connect an oven or cooktop in SA?
A plug-in appliance at an existing outlet is exempt work (PGE Regulations regulation 4(5)(c)(iii)). A hard-wired oven or cooktop is electrical work for a licensed contractor and registered worker (PGE Act sections 3, 6(1), 13).
Do you need a gas fitter to connect a gas appliance?
For a fixed gas connection, yes: it is gas fitting (section 3). Connecting a gas cylinder and portable equipment that uses its gas is exempt (regulation 4(5)(b)(i)).
Does a retailer that arranges installation need a licence?
On a reading of section 3, a retailer that sells installation performs it, because “perform” includes organising or arranging. In Green Engineering, a seller that used licensed electricians still pleaded guilty to unlicensed contracting.
Can an installation business use registered workers without a contractor licence?
A business whose principal purpose is installing plant or equipment is exempt from the contractor licence, on condition that the work is done by a person licensed or registered for it (regulation 4(1)(b)).
Who provides the gas certificate for an appliance?
Where a registered gas fitting worker does the work, the regulations’ notification and certificate requirements must be complied with (Gas Act section 56(2)).
Who is responsible if the appliance does not fit the space?
The contract decides who measured. Where the consumer told the seller what the appliance was for, it must be reasonably fit for that purpose (Australian Consumer Law section 55).
Who takes away the old appliance?
The terms decide it: disconnection by the right trade, removal, disposal, the charge and any trade-in value.
What if the customer stops an installation job halfway?
The terms should say what is payable: work done, materials ordered and the return of anything not installed. In Christopoulos, the business was paid for the work done by the client company.
Does an appliance installation need a written contract?
A domestic job under $20,000 is minor domestic building work, so Division 1 of Part 5 does not apply (section 27(2)). A domestic contract for plumbing, gas fitting or electrical work with a charging clause must still meet section 33B of the PGE Act.
Do I need a lawyer for appliance installer terms and conditions?
The law does not require one, but appliance work moves between exempt and licensed connections from one job to the next. We draft appliance installer terms and conditions for South Australian installers and retailers that say who connects what.
Related trade contract guides
Related guides
- Plumbing and electrical contracts SA
- Electrician terms and conditions SA
- Gas fitter terms and conditions SA
- Hot water installer terms and conditions SA
- Plumber terms and conditions SA
- Kitchen renovator terms and conditions SA
- Smart home installer terms and conditions SA
- Minor domestic building work SA
- Trade contracts SA
- Terms of trade and retention of title